Should I buy it

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 16, 2005
Threads
9
Messages
37
Location
Dothan, AL
I am currently driving a 72 FJ55. I have the opportunity to buy an 85 4WD pickup for $500 that supposedly just needs a new head gasket. My question is, if it turns out that it needs more than that are there things that I should be able to use off this truck to enhance my rig? ie....power steering, disc brakes, AC, etc, etc...
 
I'd get it if I was outa college...
 
jorj54 said:
does anyone know if it is difficult to change out a head gasket on a 22r engine?

It isnt a bad job. A friend of mine and I pulled the head off of my 86 Runner to fix a striped plug hole and got evertyhing re-installed the same day. In my apartment parking lot no less. So it can be done in less than a day if you have 2 people that know what they are doing.
 
Last edited:
I would vote that you go for it too. There are a lot of parts that might make their way over to rig over time...

Head gaskets are not so involved that the home mechanic with semi-basic tools and a good manual cannot perform in the garage. Just find a good machinist and your set.

500 bucks sounds pretty sweet!

Rezarf <><
 
put in a timing chain kit while you are in there. At least check to see if it has been done. Nothing more annoying that that sound of a loose chain hitting the cover. Sounds like the motor is coming apart when it's idleing.
 
Not to take over the thread, but I have an '83 Pickup sitting in my yard that I have had for sale for a while, I am picking up (my first) '76 FJ40 this sunday. Is the front axle the same? is there a list somewhere that shows what parts are swappable from what years & models?

Thankx!
 
MrMoMo said:
Not to take over the thread, but I have an '83 Pickup sitting in my yard that I have had for sale for a while, I am picking up (my first) '76 FJ40 this sunday. Is the front axle the same? is there a list somewhere that shows what parts are swappable from what years & models?

Thankx!

you already have vented disc brakes, so mini rotors/calipers would be a downgrade. you should take the mini spindles/birfs and hubs though. oh, and if it's got a cv driveshaft up front, save that for when you go soa. extended, they make great rear shafts.
 
I didn't act fast enough. I guess it was a good deal. I'll know not to dawdle next time. Thanks for the help everyone.
 
don't regret it. "supposedly just needs a head gasket" could have meant a whole lot more; be glad you didn't need to find out. There will be more out there.........good luck :)
 
Back
Top Bottom