Shiney New Snorkel

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 13, 2010
Threads
18
Messages
152
Hi Just finished my New snorkel, I didn't like those plastic ones that connected to the Original filter, that filter box and all its ancillaries weighs a ton.
So I took Four 2-1/2 Stainless bends approx 1.6mm wall thickness that's 1/16 " for all the old fashioned stick in the mud's.
2 -  bends for toriod.webp

Had them welded together as a toroid then split down the middle to leave me with the outer part of the Toroid.
3 - Toriod welded up then split.webp

From there I took one half of the inside section to add to the Outer ring.
4 - Inner from Ring.webp


5 - Ring Mocked up.webp
Then had a top welded on.
6 - Top welded in.webp
 
The finished plenum from the side before Cutting an opening fro the snorkel.
7 - From Side.webp

Fish-mouth on a 3" 90 deg Elbow
8 - Fishmouth on 90 elbow.webp

Then we open up for the fish-mouth.
9 - opening in Plenum 1.webp

10 - opening in Plenum 2.webp

Tape the 90 Bend to the Plenum ready for welding ( I outsourced this as I don't have a welder)
11 - Taped together 1.webp
 
Second View of the two parts taped together
12 - Taped togeter 2.webp

Finished plenum and the other parts attached, sorry stopped doing the assembly photos here.
13 - FInished product engine.webp

Close up of how the upturned 1/4 of the toroid fits to the outer with an extra bead of weld as a mating flange to the carb'.
14 - Carb plenum close up.webp

This how I mounted to the Screen as I couldn't be bothered to go back and get charged for more welding. I'll weld it up when I buy a Tig machine.
15 - Mount To Screen.webp

How the full Snorkel looks on the Truck, the Bonnet is to be re-done when I get a welder I just pulled around 20 kg of Bondo/filler off it.
16 - Full side.webp
 
From the Front

17 - Full Front.webp


And Lastly from the side a bit closer, I had a flange welded in place and inserted a neoprene gasket to prevent rubbing.
18 - Close side.webp
 
Nice! Something you may think about is what are you going to do if you want to drive without the windshield up, clipped to the hood.
 
Nice work! Definitely unique over the standard black plastic snorkel. How did this compare for cost with the standard snorkels?
 
Wow! Looks great. I'm with GbG, and curious of the cost. I'm sure you got killed on the labor welding, so it would definitely be a more friendly DIY price tag.
 
Nice! Something you may think about is what are you going to do if you want to drive without the windshield up, clipped to the hood.

Hi I don't think Ill drive with it down as My Canvas roof is Riveted to the Screen also.
 
Wow! Looks great. I'm with GbG, and curious of the cost. I'm sure you got killed on the labor welding, so it would definitely be a more friendly DIY price tag.
Yes it wasn't cheap, I started believing I was saving, It was probably around 300 to 500 dollars in total, However as I am in Indonesia the price and wait for shipping means In the end it was worth it.

I never looked at the costs I just started with the Toriod and kept going.
 
Back
Top Bottom