SC Rebuild source

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 4, 2014
Threads
12
Messages
231
Anyone have their's rebuilt recently?
Nearing 100k and making plans for rebuild.

Magnuson referred me to their only 'certified' rebuilder at superchargersonline.com
Spoke with David and price is right in ballpark forum search - around $800. Sounds like if rotors bad there's no part kits available to make the full rebuild.

Found PSE in Oklahoma (from CDAN) and Jon Bond referenced on mud forum. Reaching out to them soon.

Any others more recent - like last 6-12 months?
 
Looks like you’ve found all the shops I’ve seen mentioned over the years. John Bond still offers the service and some rebuild parts.
 
I rebuilt mine @ roughly 150,000 miles. New front bearing and seal, and new needle bearings in rear. Did not replace bearings in bulkhead as that would be very technical and likely to require some specialty tools. Also replaced the couplers in the front since I had them already. The only part showing any wear and tear was the front seal.
It was weeping a little. The other 3 bearings I replaced looked really good. Lots of grease still in the bearings, no significant wear, and no metal shed. I used a kit from Amazon. Still running great after 50,000 more miles.
 
I rebuilt mine @ roughly 150,000 miles. New front bearing and seal, and new needle bearings in rear. Did not replace bearings in bulkhead as that would be very technical and likely to require some specialty tools. Also replaced the couplers in the front since I had them already. The only part showing any wear and tear was the front seal.
It was weeping a little. The other 3 bearings I replaced looked really good. Lots of grease still in the bearings, no significant wear, and no metal shed. I used a kit from Amazon. Still running great after 50,000 more miles.

Thanks for the tip. Found you here on some more info. Checking into the kit myself.
 
Anyone have their's rebuilt recently?
Nearing 100k and making plans for rebuild.

Magnuson referred me to their only 'certified' rebuilder at superchargersonline.com
Spoke with David and price is right in ballpark forum search - around $800. Sounds like if rotors bad there's no part kits available to make the full rebuild.

Found PSE in Oklahoma (from CDAN) and Jon Bond referenced on mud forum. Reaching out to them soon.

Any others more recent - like last 6-12 months?
Spoke with Ed at PSE and about 2 week turnaround - more in the $850 range from what they are seeing these being older

Jon Bon 95-97 Toyota Land Cruiser 4.5L Supercharger Remanufacture / Rebuild 95-97 Land Cruiser 4.5L Supercharger Remanufacture / Rebuild [Rebuild services] - $727.00 : Jon Bond Performance, The Worlds Premier Supercharger Rebuilder and Parts Store
Similar 2-3 week lead time and about $875 pending condition.
 
Back
Top Bottom