saginaw questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
101
Messages
1,454
Location
The West
I just want to ask poeples opinion on this. THe peopel who have done the saginaw power steering and kept the original wheel:

how is it
would you go with a smaller wheel and why

just curious

is the big stock wheel to much for the tight turning radius of the sag box?

is there a sag box that would be close to the stock turning radius of an fj40?

thanx , i have alto of weird questions.
 
Yeah. I'm moving this to tech.



Really.




I like the mini truck wheel. My fat ass self doesn't like the big wheel. Too hard to squeeze behind.

The 4.5 turn box from, say, a 66 Impala has the turning radius of a stock gear.

Look in the tech links page. There a link at the top of this page.
 
steering

Well as you can see from the mods of my truck this might sound stupid BUT

I like the stock steering wheel it makes me feel like it is all stock (right) but I like the old steering wheel.

just a thought, a stupid one!:)
 
i like aftermarket smaller wheel, faster turn and easier to climb in and out
 
I vote for the stock wheel as well. It works fine, and looks stock. Saginaw steering is a very good and cost effective upgrade. Check with Orange45-he has nice laser cut plates in stock and ready to go.

Just personal opinion-I like the looks of the Scout II box in there but it is harder to source. It sure does tuck in well, though.
 
thanks for all the opinions . i take it all of you have saginaw and am very happy keeping your stock wheel in there. thats what I want to do.

so if i get a 66 impala box it is the same gear turning radius as the stock fj40 turning radius. now is that going to be a sag power box on a 66 impala?

so non of you guys have had problems with having th elarge stock wheel and overturning the sag box. I was under the impression that the turning was sooo tight in the box, that the wheel was jsut to big adn if turned a little bit you would end up doing a uturn!
 
okie said:
thanks for all the opinions . i take it all of you have saginaw and am very happy keeping your stock wheel in there. thats what I want to do.

so if i get a 66 impala box it is the same gear turning radius as the stock fj40 turning radius. now is that going to be a sag power box on a 66 impala?

so non of you guys have had problems with having th elarge stock wheel and overturning the sag box. I was under the impression that the turning was sooo tight in the box, that the wheel was jsut to big adn if turned a little bit you would end up doing a uturn!

The reason the stock steering wheel is so large is to increase your leverage onto a non power assist steering system. Imagine trying to turn a steering wheel with only one inch in diameter(impossible). Keeping the stock steering wheel on a sag conversion will make it even easier to turn the wheel and slightly increase the amount of turns lock to lock compaired to using a smaller daimeter steering wheel, but will not affect the turning radius. Choosing the correct sag box is the important part in determining desierable turning radius.
 
I would have prefered a slightly smaller wheel, but like the stock wheel's stock looks so I kept it. The smaller the wheel the less you have to move your hand to make a turn, but the number of rotations does not change. If anything the stock wheel makes it less squirly than a smaller wheel.
 
ya basically i want to find a saginaw box that allows me to rotate the wheel as much lock to lock as i would with the stock wheel.

when i say o want the same turnign radius in the sag box, i also want to have the exact same rotations inside the cab at the steerign wheel as i would stock.



....correct me if im wrong but a 66 impala box wouldn't be power right, or would it?
 
okie said:
....correct me if im wrong but a 66 impala box wouldn't be power right, or would it?

Of course it's power! Infact, it's big power. It will move your wheels with so little effort it's weird. One finger in the rocks will do it.
 
Cruiserdrew said:
Of course it's power! Infact, it's big power. It will move your wheels with so little effort it's weird. One finger in the rocks will do it.


thats awsome! thanx everyone
 
Gumby said:
I like the mini truck wheel. My fat ass self doesn't like the big wheel. Too hard to squeeze behind.

So the mini truck's wheel fits? I got one of those fat asses too and hate the stock wheel. Any particular year of mini? Does the horn still work?
 
Last edited:
Back
Top Bottom