Rhino lined flares

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 1, 2006
Threads
126
Messages
859
Actually its this Duplicolor stuff I picked up at auto zone right below the Herculiner which was 89$ and the Duplicolor was 64 or so with tax. But my flares and rocker panels are left on check it out.


dscn0026ij3.jpg

dscn0027es7.jpg


dscn0028vs2.jpg


dscn0029zk4.jpg
 
Looks great. You might want to get some yakima or thule bars for your roof rack and ditch the factory ones. I had one of the feet break at the joint to the steel bars. I've only had a couple of kayaks up there a couple of times and a 6 ft ladder, not a big spare tire. Use whats left of your duplicolor kit to cover the patches.

I used the $29.95 quart of herculiner. I was debating on the duplicolor spray can, but wasnt sure how it would have held up. I probably should have gone that route, because it may have been a little less coarse texture.
 
duplicolor in the spray or the can is not a very course finish compared to 'real' bedliners like Rhino or Durabak. It doesn't have any chunks of rubber in it. My 40 was Durabaked w/ Duplicolor roof.

Looks good, I know many people have wondered about bedlinering the flares, now we have a sample. Look better in sand ;)
 
Nice

The before pictures look like my rig and I was hoping someone would do that to the flares... Looks nice....:grinpimp: Why didn't you do the rear bumper?

Can you snap a shot from the front angle?
 
Ya Ill get that picture later. But I didnt do the rear bumper because I figured if I really wanted to I could do it later on so I just left it stock for now and I like the way it turned out.
 
Looks good! By chance would you have a close up of the Duplicolor, so I can see the texture.
Thanks
 
Ya those wheels came with free locking lug nuts and I got so tired of leaving my lug nut key at home and stripping 2 of them that I took all 4 of them off.
 
Ya those wheels came with free locking lug nuts and I got so tired of leaving my lug nut key at home and stripping 2 of them that I took all 4 of them off.

:eek: Go to your local CSK, Autozone, or whatever and buy a pack of new ones (non-locking). Or get them from Dan. Cheap. Worth it. Done. I also ditched the locking lug nuts ( I have the ugliest wheels and tires), and now just have one shiny, chrome nut per wheel...
 
Looks good! By chance would you have a close up of the Duplicolor, so I can see the texture.
Thanks

Top is duplicolor, rest is Durabak, I think the photo is good enough to see the texture difference

second pic is close up of Durabak and the shock tower is coated with Duplicolor spray (top is rollered duplicolor). The lower part of the shock tower has additional misting with the spray can to get more texture, and there may even be a change the tower was still hot from welding when I sprayed it - patience is not my strong suite.
crusier.webp
comparison.webp
 
Last edited:
First off, you were brave playing with that stuff on such a nice drive way!!
Second off, put the missing lugs back on!
Third off, looks good although it's all going to be for nothing when your flares start popping off.
Fourth off, I would do the rear bumper.
 
Looks good! By chance would you have a close up of the Duplicolor, so I can see the texture.
Thanks

Durabak offers smooth liner on there site so I sent away for a sample of Dark Gray just out of curiosity. Unfortunately they sent me Dark Green but the surprising thing was that it was glossy and doesn't appear to withstand pin stripping. But a smooth finish, flat, and non glossy would have been nice and something different.
 
Back
Top Bottom