Rethreading shock posts?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 31, 2003
Threads
952
Messages
10,248
Location
"the whale's vagina", CA
Hi Guys,

I took these L shocks off my truck the other day, the front bottom post were stripped when I removed them. I am wondering if anyone has ever repaired something like this? Can these posts be rethreaded with a die? These are fairly new shocks and would hate to see them go to waste.
IMG_0060.webp
IMG_0061.webp


Noah
 
Yes, but you wouldn't want to. There's not enough metal there to support any kind of load if you cut the diameter down to the next standard size. It's not like shocks are trading at gold prices...
 
If you did you'd need a build-up weld IMO.

If I was hell bent on doing this, I'd want a wet towel wrapped around the shock with just that stud exposed.

I'd use it as an excuse to go over to Fox, etc.

I'll pull mine & send 'em to you, then I've got an excuse to follow my own advice :hillbilly:
Actually, that could work.......you interested?
 
I would run them, run a die over them, then make a spacer to put the nut in the good thread area.
 
Or use a coupling nut, take advantage of all the available threads?
 
My front passenger OME shock recently did the same thing on the top stem. I guess just from 17 years of mall speed bumps. I added a couple of spare shock washers to get the nut up to where there are some threads.
 
My front passenger OME shock recently did the same thing on the top stem. I guess just from 17 years of mall speed bumps. I added a couple of spare shock washers to get the nut up to where there are some threads.

you've been running the same shocks for 17 years?
 
I sold a pair on Mud that looked similar but not quite as bad. I priced them cheap and the buyer made his own decision. Never did hear back from him.
 
Back
Top Bottom