Restoration project

Do I restore or mod?

  • No way, keep completely original

    Votes: 2 12.5%
  • Modify simple things that can be easily returned to original condition

    Votes: 9 56.3%
  • Modify heavily: lift, bumpers, winch, etc.

    Votes: 5 31.3%

  • Total voters
    16

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 16, 2017
Threads
10
Messages
137
Location
Golden, CO
I may be new to this forum, but I'm not new to forums... I was on forums when Al Gore invented the internet... so here's my first post.

My wife and I are on our second Land Cruiser (1997). She insisted we trade in her Audi Q7 and return to a 97... her requirements... Yes, I know, she's awesome.

We managed to find a 1997, unmolested truck with 127k original miles. Every body panel is pristine, all VIN's check out, and a complete documentation trail going back to the beginning. It also has the collectors edition badging, and none of the roof rack/factory side steps. Yep, a complete gem with 0 rust.

So here is the question: Do we modify it at all?

I've invested in a professional polishing and buffing kit to keep the paint nice (it has some nicks and scrapes), but any thoughts on some creature comfort change outs? We were thinking basic LED lights in the interior, and perhaps some replacement lights for the front. The interior is in immaculate condition (the leather has hardened some in the front, but the rear is excellent, and the 3rd row has never been sat in.

If any of you would like to take a look, let me know. let me know your thoughts on mods... if any.

IE

LC1.webp
 
Great looking truck there. I've also got a White CE '97 though in much worse condition at this point. I'd say, catch up on any maintenance and cleanup, like it sounds like you are doing, and mod as your needs indicate through use. It's a great truck, perhaps my favorite ever made, but I don't know that it is worth sacrificing any useability for "preservation" so I'd modify as desire and budget allow to suit your uses.

And, welcome to the forum, it's a really good one. Expect to be flipped off soon though ;)
 
Looks great. Does it have a lift? Looks a bit tall for stock. I have the same truck, but with more miles (248k), an oem roof rack, and lockers. Not sure if yours is 3x locked or not.

FWIW, my plan has been a restore with tasteful modifications that wouldn't damage the truck in any way. So far this has included a little tlc for the paint (touch up, acid wash, polish), removing the running boards, new Toyota windshield and trim, plenty of mechanical maintenance, and an aftermarket roof rack. In the near future it will include a front bumper (probably ARB), winch, and refinished wheels with 305/790r16 Cooper STT Pros. Long term plans include a rear bumper with tire carrier(will not cut the rear cross member), bolt on sliders, replacement leather, and maybe a modest 2-3" lift. If you have a clean truck and want to enjoy it, build it, and care for it I think this is a logical approach.

Once you start ripping off fender flares, applying bedliner, cutting the cross member, and/or lifting above 4" you've entered into deeper waters.
 
Welcome :flipoff2:, and great looking ride. The land cruiser is extremely capable as is. Unless you are planning to wheel/ camp frequently most accessories are for cool factor rather than practicality. If this is meant to be a daily driver keep in mind that this year already gets pretty bad mpg and much of the bigger accessories weigh quite a bit.


It all really depends on your planned use and what you like.
 
I voted "modify simple things" but I would include bumpers and a modest suspension lift as simple mods that are easily reversed (assuming you save the original parts). Both bumpers and your average 3" OME lift could be returned to stock in a single day, though I think it's unlikely you ever will.

One more thought about bumpers. The stock bumpers on the 80 are CRAP. If you really care about keeping the body of your 80 nice I suggest replacing the bumpers with something much more robust. Otherwise, the first time you nudge a Prius, pine tree or snow bank you'll be visiting a body shop.
 
With a cruiser that clean I would only change the things that fail...with toyota parts. I don't know that I could bring myself to modify such a pristine specimen. If you decide to use it for more than a daily driver/commuter/grocery getter then you should re-pole the community based upon your needs and specific intended use. Great cruiser, welcome home.
 
So if this is for the wife yes cup holders a nice Bluetooth stereo system with speakers really good tires and brakes and start changing the rubber hoses under the hood including radiator and all fluids. You can change the marker and blinker and back up lights to LED. The
Head lights have bulbs so change them out too.
 
welcome to Mud. super nice Reg.can you have your Wife find me one like that please.
 
The first mod totally necessary is decent cup holders made by mud member @bhicks
Products | BH3D Printing

And only then depending on your intended use continue

For daily drive I will keep it stock and the mode will be maintenance and reliability

View attachment 1565674

I 2nd the BH3D printing products
Love this one.
80 Series Cup Holder Console Insert | BH3D Printing

and this
http://www.sleeoffroad.com/technical/images/cup.jpg

this
http://www.sleeoffroad.com/products/images/interior/centerdiff_switch_250.jpg

ultra-gauge
UltraGauge OBDII Scan Tool Support

for a quieter ride but bit of a DIY project
Products | Sound Deadener Showdown
 
Start with simple things and see if you need to go any bigger. Side step/sliders would be nice for a bit of added protection and convenience on the side.
 
Thanks so far.
This is our 2nd 97 for the Mrs. We learned some harsh lessons on the first 97 (only the experts will do work on it).
The truck is primarily for getting around town. We will get it out and do some light offroading, but I'm actually thinking of buying another FJ80 already modded to go beat up in the backcountry.
We were thinking LED's on the inside and perhaps some on the exterior. Thought about the bumper change, I just need to find one that the wife likes.

BTW, we live 4 blocks from Slee.
 
If it's the wifes' rig, let her decide if she wants the lift, tires, yadda yadda.

I could see a sturdy armor / winch bumper - if she likes them & they aren't too 'Road Warrior' for her taste. The factory bumper is pretty flimsey if she tags something, but at least it isn't wearing a 'brush guard'.

That's a relatively low miled rig I'd keep to mild mods on, or as mild as she likes.

Buy a bit more 'experienced' 80 if rock crawling dreams are in your future, one you don't mind a few brush pinstripes & such on.

That'd be my way forward.
 
Lift it, lock it, armor it, drive it!
 
My thought is that the value of our Land Cruisers is in the functionality vs. keeping it in original concours condition. Mod it to your heart's content, if you want it to be a show car you can always tell yourself that the mods you are doing are 'period correct.'

And by all means, keep up with maintenance!
 
How do I tell its lifted?

Measure the distance from the center of the front hub / centercap on wheel to the fender flare lip & post it.
It looks like it has a mild lift, esp if the tires are ~33" OD.

If the wife is perfectly content with this as a 'reasonably longterm owner' - then heck with resale value & mod away as she like. If this is a phase (doesn't sound like it), then you may want to keep resale value in mind as it sounds like a nice one (still 20 yrs old, needs all the fluids flushed & same as if it had 2x the miles).

At least it's a quality one worth investing the time & effort in all that work though.

You may end up getting one yourself & modding as you like for however you use it, they are just so convenient & flexible/utilitarian- and for a solid front axle it's as civilized as they came.
 
Back
Top Bottom