reproduction VIN plates

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 19, 2008
Threads
18
Messages
71
Location
Washington
Does anybody make reproduction VIN plates for FJ40s? My VIN plates are missing and I would like to replace them, but can't find anybody that makes them. I have seen pictures of 40s with new VIN plates, but were did they get them? I don't know what happend to mine, and no the body has not been changed. The title matches the frame #'s so who knows.
 
Is a repoduction VIN plate even legal?
 
Not really as I understand it...
 
Legal until it is stamped with a VIN. But if it matches everything else..................
 
I would think someone would make them. I know for some antque car restorations for show cars it is possible. I have seen them in catelogs.
 
Pick up a copy of Hemmings Motor News at your local bookstore, there are a number of resources inside. Then, talk with your local dmv. Oh, and you might want to be sure your vehicle is not stolen first.
 
Like this one? ;)

Just part of my archives. Can't remember where I got it....
FJFrameVINTag3.webp
 
I have one that says Chevy 350 on it... Not to sure where the old owner got it, but I think AATLAS1X is right on that it becomes illegal once you change the VIN#. Call the DPS in your state and ask. I have a 75 blazer that the VIN was changed (it's a Trailer queen) I know in Texas If you get pulled over with a Fake VIN plate it can be a Class 3 Misdemeanor. Your rig will be towed on the spot. But thats Texas.
 
Coolerman that's what I'm looking for! Anybody know where to get one?

Also, are there only three VINs on a 71 fj40; the LF kick panel id plate, right inner fender id plate and stamed on the RF frame section? Is there a hidden VIN on these anywhere? Does the engine number have anything to do with the other numbers?
 
I have all the samples over the years of Data and VIN plates in the works, but nothing anytime soon........

Shane
 
Vin Plates

I'm checking on a source for this. Years ago in a previous life I used to run a process called metal photo. This is the same process that vin tags are made of. Photografically sensitive aluminum plates are exposed to a high intensity light source and then chemically baked to seal the image. The only critical aspect is getting "good copy". That is to say a good photo negative to work from. It has been 30 years since I was involved in this process but the equipment is still available to me and it used to cost about 30 cents a square inch for the photo plates. I'm sure cost has increased in the last 30 years, but if someone is willing to pay $10 - $20 for a blank plate that it would be commercially possible to create blanks. The ingraving of course would be the responsiblility of the end user.

What do ya think?? If I get some feed back I'll pursue the matter further :D
 
Cruiserlad I would be very interested!!! I'm sure that I'm not the only one either. I would be more than willing to pay for a original quality data plate.
 
TEQ need to know

I thought I might add that artwork would be an additional cost. That is to say that it would take some work with PhotoShop or equivilant to clean up an old tag. But if someone is replacing a tag there shouldn't be any question of Toyota property rights.

I thought I might also mention that the shift pattern instructions on the jocky box door is also metal photo. I wonder how many of those need to be replaced.

Just trying to think outside the box! :D





TLCA #6599
92 FJ80
88 Mini
72 FJ40 (almost done!!!)
 
I contacted www.datatags.com and this is what they had to say.

"I'm told someone already is making these blanks. No need then for me to reinvent the wheel. Check with the Major Toyota parts peddlers to see if you can find some"

That's not a lot of help. So who is making these? I want a some.
 
Back
Top Bottom