Replacement Pieces for hardtop?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Why hasn't that piece been repro'ed yet? It is something that almost all of us could use.
 
But all the trucks in the S.E. rusted out there from the humidity.
 
I don't think this is what he's asking about.

See "lip that bolts hardtup to tub".

I think he's talking about the flange that is spot-welded to the hardtop sides (item 12). The bolt (item 10) goes through it and gasket (item 6) to attach top to tub. Correct me if I'm wrong.

Another suggestion is to try to find someone willing to cut this piece off and ship it to you. I had to do this for the piece that attaches to the windshield frame. 50 phone calls and $50 later I was dropping it off at the bodyshop to have them install it.
 
Last edited:
dgangle said:
I don't think this is what he's asking about.

See "lip that bolts hardtup to tub".

I think he's talking about the flange that is spot-welded to the hardtop sides (item 12). The bolt (item 10) goes through it and gasket (item 6) to attach top to tub. Correct me if I'm wrong.
Zactly...

At least that's what I was referring to in my post. :)
 
dgangle said:
I don't think this is what he's asking about.

See "lip that bolts hardtup to tub".

I think he's talking about the flange that is spot-welded to the hardtop sides (item 12). The bolt (item 10) goes through it and gasket (item 6) to attach top to tub. Correct me if I'm wrong.

Another suggestion is to try to find someone willing to cut this piece off and ship it to you. I had to do this for the piece that attaches to the windshield frame. 50 phone calls and $50 later I was dropping it off at the bodyshop to have them install it.
Sorry my description is so vague. It looks like #6 is the piece Im referring to. I think its a pretty common trouble spot on the hardtops like he said. I do believe its spot welded on and I was just wondering where I could get some replacements for it, if thats even possible.
 
Jones4WD said:
Sorry my description is so vague. It looks like #6 is the piece Im referring to. I think its a pretty common trouble spot on the hardtops like he said. I do believe its spot welded on and I was just wondering where I could get some replacements for it, if thats even possible.
number six is weatherstrip
 
Jones4WD said:
...I think its a pretty common trouble spot on the hardtops like he said. I do believe its spot welded on and I was just wondering where I could get some replacements for it, if thats even possible.


Like I said, get on the phone with the vendors listed in the back of Toyota Trails and tell them what you are looking for. I have never seen this piece offered as a repro so you are pretty much going to have to find one used. Someone will have a rust-free top that was on a rollover. Have them cut the whole bottom 6" off and ship to you. Take it to a bodyshop and have them cut spot welds on both and reattach to your sides in the correct spot, finish and you're done. Open up your wallet as I see this as being pretty time consuming and body shops aren't exactly working for peanuts these days.

Depending on how much of this you can do yourseld, it may cost you more and be a bigger PIA than finding a different top or buying the fiberglass repro's.
 
I have the same problem. I soved it buy buying used sides that were not rusted. A whole lot easier than cuting the rotted sections out and replacing. Though I will probably end up doing that for the old ones just to hsve a spare.
 
Back
Top Bottom