Replace knuckle? Opinions please.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks for the input. I did indeed hit the high spots with a file. I’m willing to roll the dice with the marring on the wiper side of the knuckle. I drilled the broken stud and removed it without much drama (which surprised me). I decided to just replace all of the knuckle studs. Thanks for all the support. It’s kice to stand on the shoulders of giants!
 
upload_2019-1-14_14-31-14.webp

I used my small mill bastard and did some draw filing to knock the marred surface down, like Howard705 suggested The file was really old and warn, even so it took very few passes to flatten that spot. Glad I went slow!
 
Back
Top Bottom