MScruiser
obsessive-compulsive oppositional-defiant wise-ass
Yes, I have nothing but the highest expectations for Dukmon's endeavors.
Rear Cargo Mat........
- Thread starter dukmon
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Those are in the Philippines and not UAE, I have weather techs in mine and haven't found a fault other than the sticker badging falling. Rear mat got chewed up by the dogs but is sort of still useable.
I've seen the naming a few times I think in the Philippines they call the 200 "dubai land cruiser" as their "land cruiser" is the prado, probably first 200 was imported in from dubai?
Still waiting on an update to the Best Cargo Mat Known To Man...
In the meantime I just called Weathertech inquiring about any development plans for a 3rd row mat with no jump seats. The customer service rep I spoke with seemed very aware of the cutout issue and spoke of other customers with 2008+ models ordering other models and modifying (dukmon?). She put me on hold as she checked for any current development plans and reported back with the devastating news...currently there are no plans for a weathertech designed mat to fill the space. She suggested that I fill out a Product Request Form. I then asked what type of request or order numbers it would take to have the product developed. Good news, we only need 6,000 requests!
Make that 5,999... http://www.weathertech.com/service/product-request-form/
In the meantime I just called Weathertech inquiring about any development plans for a 3rd row mat with no jump seats. The customer service rep I spoke with seemed very aware of the cutout issue and spoke of other customers with 2008+ models ordering other models and modifying (dukmon?). She put me on hold as she checked for any current development plans and reported back with the devastating news...currently there are no plans for a weathertech designed mat to fill the space. She suggested that I fill out a Product Request Form. I then asked what type of request or order numbers it would take to have the product developed. Good news, we only need 6,000 requests!
Make that 5,999... http://www.weathertech.com/service/product-request-form/
Based on the number of LC's sold you will be lucky to get 600. Why not just order the weather tech mats and then come up with a solution for the area where you have a void? I would not hold my breath on a new design coming from weather tech.
Totally agree on all of your points. I laughed when she told me the number and replied to her that the vehicle sales would not support the required amount. I have a set of their current offering installed. The issue is when I take out the 3rd row, I need another weather tech mat that has not been cut out or find an alternative solution. The weathertech mat does a fantastic job of containing mud, snow and dirt...until you cut out the tabs to use the 3rd row seat.
So I wait for the Best Cargo Mat Known To Man
- Thread starter
- #49
Sorry......... The Best Cargo Mat Known to Man project has been sidetracked recently due to too many other things happening.
My free time has been pretty slim.
My free time has been pretty slim.
Weather tech tech liner for truck beds. Wonder if these could be cut / modified to fit for the rear of the LC200? Anyone else have a completed thought on that scenario?
FJ this is the thread your looking for. Good luck
Markuson
SILVER Star
They made it out of Shag Carpet, didn't they?
Owned by this guy from Warner Bros. perhaps?
Finally found a 2-row LX570 to look at (2019) and the cargo area "all weather" heavy rubber mat is a perfect fit for my 2008 LX570 with the 3rd row seats removed. Covers all floor area from rear seats to tailgate and sidewall to sidewall for entire length of the cargo area. Includes the little drop down behind the 2nd row seats. Only available in black. pn is PT908-60180-20. Ordered on Friday. I'll have it next week. The mat is not a "tray" like a weather tech. It's not completely sealed if you dumped 5 gallons of water in there or something. There are a few slots where D-rings from the floor can poke through for securing cargo (like the one in Footwork's post above). But it looks very durable and like it will contain most anything. I'll probably just secure some heavy rubber tire patches over the holes I'm not using from the back side and that'll seal those up. Pix to follow when it arrives. Now to figure out something for those holes in the sidewall trim. Thinking about tucking carpet behind the trim to cover the metal parts. I have to be able to remove it easily when I use my home-built drawer/fridge/battery system because I use those bolts to hold it in.
-Dave G.
-Dave G.
For those interested, these Lexus mats are running about $130 online at various sources.
Super cool! Glad to hear there are on-line sources. I hadn't been able to find anything at all on line that was verifiable full coverage for a 2-row. I'd tried a couple of places that claimed to have mats with "no cutouts for 3rd row seat mounts", but it turned out they just meant the rectangular holes for the latches. The sides were still cut out for the seat bases.
This Lexus one has kind of disgustingly garish branding in the center (theme!), but oh well. I gave $170 for this one from the dealer, all in, shipped to my house from their parts depot ( didn't have in stock and I live about 2 hrs from that dealer) and they'd spent a good hour with me all total, finding the car, pulling the mat to try it in mine, etc. So I went in ready to pay their price. The parts guy was also very amenable when I asked him for the part number so I could share it on line with others who didn't have the opportunity to verify fit like I did. I've gotten a ton of good info here and just hoped to give back a little. Hope it helps someone. Like I said, I'll post a pic when I get the mat. I was in kind of a hurry on Friday when I did the test-fit and forgot to take some then.All the best,
-Dave G.
Since they are selling LX’s with no 3rd row, would it be safe to assume we will be able to get the plastic parts to fill the spots where the 3rd row mounts?
I know what you mean but there are no "caps" for the holes. It's a whole different panel in the loadspace of the two-row vehicles. With all the crap that's on the back sides of those panels, I wouldn't be sure they'd swap across easily. I actually had mine entirely out to route more (some!) power outlets in the rear I was stunned at the amount of computer boxes, wiring looms, and duct work that is hidden behind those panels. I literally found BARELY enough room in all of it to add something the size of a 12v socket.
-Dave G.
-Dave G.
