Rattlecan color

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

JDNs78FJ40

SILVER Star
Joined
Dec 3, 2018
Threads
114
Messages
815
Location
Draper Utah
Anyone have a suggestion on a good brand of rattlecan spray paint for these plastic pieces? Original color was the dark grey but leaning towards black interior.
2007675
 
I've had poor results spraying paint on plastic. I use bronze wool, sit down with the pieces and start rubbing to break thru the surface of sad. I take my time. Then apply favorite rubber/plastic liquid. Sometimes I use clear coat scratch remover and then something with carnuba wax on the surface of the bits. If it is a rough surface forget my last sentence.
 
Look into adhesion promoters for plastic parts. They help paint attach better to plastic parts.
 
I'v had good luck with spray paint advertised for plastics. I usually use a scotch bright pad and diluted degreaser then wash the part with liquid dish soap blow dry and spray. Never had any peel up doing it this way. I've done several A- pillar gauge pods with zero issues. Like any paint jobs, it's all in the prep.

To your question, black would look great IMO.
 
Back
Top Bottom