NLFS Random Archived Classifieds
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
TOYOTA gasket sealer, all
That stuff has a shelf life and I would not use it if it was more than a year old, tops. It is readily availabe at all Toyota dealers under the two numbers mentioned above.
That stuff has a shelf life and I would not use it if it was more than a year old, tops. It is readily availabe at all Toyota dealers under the two numbers mentioned above.
Wanted: 60 series steering shaft
I have all the steering parts your looking for. They would be off an 1987 Fj60. Respond to LndCrsr76@aol.com if your interested......
I have all the steering parts your looking for. They would be off an 1987 Fj60. Respond to LndCrsr76@aol.com if your interested......
Front Sway bar for a 92 FJ80 needed.
Looking for a stock or otherwise front sway bar for a 92 FJ80. I'll need the endlinks and bushings for the bar. Shipped to 83204, SE Idaho. slambson@ida.net
Looking for a stock or otherwise front sway bar for a 92 FJ80. I'll need the endlinks and bushings for the bar. Shipped to 83204, SE Idaho. slambson@ida.net
FJ60 Passenger Seat
Looking for a grey/blueish stripped FJ60 Passenger seat. Let me know what you got and how much shipped to 95350. I really only need the trim and foam. Let me know.
Looking for a grey/blueish stripped FJ60 Passenger seat. Let me know what you got and how much shipped to 95350. I really only need the trim and foam. Let me know.
FRONT BRAKE CYLINDERS FOR 1974 FJ55
I've got a complete set of 4 OEM wheel cylinders still new in the box, which fit 9/71-1975 FJ40/45s. They're $160 plus shipping from 75057. I think dealer pricing on these are about $70+ each, so that's a good savings. Of course, aftermarket cylinders are available for cheaper, but I can't vouch for the quality.
I've got a complete set of 4 OEM wheel cylinders still new in the box, which fit 9/71-1975 FJ40/45s. They're $160 plus shipping from 75057. I think dealer pricing on these are about $70+ each, so that's a good savings. Of course, aftermarket cylinders are available for cheaper, but I can't vouch for the quality.
Want late model hard top and rear doors
I bought a cruiser with a kayline soft top thinking it would be easy to find a hard top in the area...wrong! I have a '79 fj40 and am looking for a top and rear doors that are in good shape with no rust through and not in need of dent repair with good glass n seals. would like all hardware. Guess I just want to put it on and go with no fuss. I might be interested in trading the kayline soft top. It is in great shape and I have actually not had it on since I have owned the truck. ALso in search of a pair of steel half doors as well. Anyone know of some let me know.
I bought a cruiser with a kayline soft top thinking it would be easy to find a hard top in the area...wrong! I have a '79 fj40 and am looking for a top and rear doors that are in good shape with no rust through and not in need of dent repair with good glass n seals. would like all hardware. Guess I just want to put it on and go with no fuss. I might be interested in trading the kayline soft top. It is in great shape and I have actually not had it on since I have owned the truck. ALso in search of a pair of steel half doors as well. Anyone know of some let me know.
SM420 front bearing retainer
Ended up buying a new one - thanks though.
Mace - I'm curious about the warden's sleeve? What do they use and what's wrong with it? I broke mine pressing (a bit too hard) the Extreme Bends sleeve on and had to cut it off. I just cleaned it up and used some Loctite sleeve retainer and soldered up the cut. Haven't used it yet, but hopefully this weekend.
Eric
Ended up buying a new one - thanks though.
Mace - I'm curious about the warden's sleeve? What do they use and what's wrong with it? I broke mine pressing (a bit too hard) the Extreme Bends sleeve on and had to cut it off. I just cleaned it up and used some Loctite sleeve retainer and soldered up the cut. Haven't used it yet, but hopefully this weekend.
Eric
91-97 FJ 80 coils
I have a set of coils (still in the box) from Performance Products designed to lift and level you 4Runner (Approx. 1"+ lift). Paid $200, will sell for $100 plus shipping.
Check out their web site for details and price.(http://www.performanceproducts.com/)
I have a set of coils (still in the box) from Performance Products designed to lift and level you 4Runner (Approx. 1"+ lift). Paid $200, will sell for $100 plus shipping.
Check out their web site for details and price.(http://www.performanceproducts.com/)
- Joined
- Sep 28, 2002
- Threads
- 558
- Messages
- 8,123
- Location
- Kamloops, BC Canada
- Website
- www.shopraddcruisers.ca
Windshield base rubber gasket
I need one for a 82 FJ40 prefer unpainted and in decent shape with no cracks or rips?
Rob
rclassman@shaw.ca
I need one for a 82 FJ40 prefer unpainted and in decent shape with no cracks or rips?
Rob
rclassman@shaw.ca
4 bolt 4.25 turn sag steering box
Hi all,
I've got a box but it's only 3.5 turns and my rig will see a lot of road driving in the near future = scary highway driving. Does anyone have an extra box they're willing to part with. I'm in Sna Jose/MOdesto area and would rather not ship. also, if anyone wants my current box have at it.
thanks,
David
Hi all,
I've got a box but it's only 3.5 turns and my rig will see a lot of road driving in the near future = scary highway driving. Does anyone have an extra box they're willing to part with. I'm in Sna Jose/MOdesto area and would rather not ship. also, if anyone wants my current box have at it.
thanks,
David
WTB: '79-'84 Minitruck Aisin locking hubs
ya might check http://car-part.com . I've seen them for about $35-40 each, and bought them for $25 each.
ya might check http://car-part.com . I've seen them for about $35-40 each, and bought them for $25 each.
- Status