Quick question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 11, 2019
Threads
1
Messages
4
Location
Atlanta
Hi everyone:

Thanks to a now-estranged brother-in-law, who had professed to be an expert at all things restoration, and then proceeded to dismantle my beloved FJ to be painted, misplacing both the firewall plate and the door plate in the process (oh, yes, he most certainly did . . . . )---

. . . I find myself still shaking my head, and now setting about installing reproduction plates on my 1980 FJ40.

Thankfully, there a couple of vendors out there. This afternoon, however, the vendor asked me a good question that I could not answer with an exact level of precision-- what dimensions does this reproduction plate need to be?

Having looked at the originals a thousand times, I told the gentleman that they were roughly the size of a business card, but that I would ask folks more knowledgeable than I to help me out.

Any more precise measurements about the height and width of the OEM plates on a 1980 FJ40 would be very much appreciated.

Thanks,
 
Hi everyone:

Thanks to a now-estranged brother-in-law, who had professed to be an expert at all things restoration, and then proceeded to dismantle my beloved FJ to be painted, misplacing both the firewall plate and the door plate in the process (oh, yes, he most certainly did . . . . )---

. . . I find myself still shaking my head, and now setting about installing reproduction plates on my 1980 FJ40.

Thankfully, there a couple of vendors out there. This afternoon, however, the vendor asked me a good question that I could not answer with an exact level of precision-- what dimensions does this reproduction plate need to be?

Having looked at the originals a thousand times, I told the gentleman that they were roughly the size of a business card, but that I would ask folks more knowledgeable than I to help me out.

Any more precise measurements about the height and width of the OEM plates on a 1980 FJ40 would be very much appreciated.

Thanks,

-> click here <-
 
I saw Matt's thread offering replacement VIN plates (and had attempted to send him a PM) but have not gotten any response yet, which is why I had contacted an alternate vendor in the interim.

So that I can better answer this second vendor's question about needed dimensions, please let me know height and width if y'all can.

If and when Matt gets back to me, I'll be glad to chat with him also.

Thanks,
 
Matt will get back with you. I think he has a lot of irons in the fire. Will do a good job.
 
I saw Matt's thread offering replacement VIN plates (and had attempted to send him a PM) but have not gotten any response yet, which is why I had contacted an alternate vendor in the interim.

So that I can better answer this second vendor's question about needed dimensions, please let me know height and width if y'all can.

If and when Matt gets back to me, I'll be glad to chat with him also.

Thanks,

Please help me understand what I think I am reading. Are you interested in getting Matt’s help in providing information so you can have someone else provide you with the plates?
 
No, 65swb45, I'm just a guy whose plates have been tossed, and who now needs to replace them.

In Step One, I attempted to contact Matt (after reading a thread about how he offered the type of duplicating service that I now require).

[Nothing but crickets in response to Step One, however]

Still needing plates from some vendor (any vendor), I then tried to find another fabricator online. The second vendor wrote me back that afternoon, saying that they certainly could fabricate what I needed, and asking me to provide them with physical dimensions.

I relayed this question to the ih8mud community, starting the present thread entitled "Quick Question" . . . .

Several members then responded, just to inform me that Matt fabricates this sort of duplicate. I told them that I knew this, and advised them that I had already attempted to contact Matt but that I'd gotten no response yet.

If Matt ever does contact me, then great--- we can talk about him fabricating my needed plates.

In the interim, however, I still need some plates, from some place.

The request for height and width clarification was made to the broader group, not to Matt the fabricator (who seems to be out of pocket right now).

If anyone has an FJ40 from the general period (late 70's or early 80's), and also has a tape measure, I'd very much appreciate them sharing the dimensions of their door plate. It does not matter to me whether the responding party is named "Matt", or "Mark", or "Melvin", or "Fred", or "John", or "Katherine" . . . . .

Thanks again,
 
Door plate
4 3/4 by 1 7/8
12 cm by 48 mm

Firewall plate
3 1/2 by 2 1/8
88 mm by 54 mm

Approx. Using ruler not calipers.

My two cents. Matt makes reproduction plates. Apparently the other vender makes just plates. If he was making Landcruiser plates he would not need the measurements.
I would hold out for Matt who contributes so much to this forum.
 
Door plate
4 3/4 by 1 7/8
12 cm by 48 mm

Firewall plate
3 1/2 by 2 1/8
88 mm by 54 mm

Approx. Using ruler not calipers.

My two cents. Matt makes reproduction plates. Apparently the other vender makes just plates. If he was making Landcruiser plates he would not need the measurements.
I would hold out for Matt who contributes so much to this forum.


Thanks very much, Shark56.

If anyone has any suggestions of how to better reach Matt, I'd be very appreciative of those suggestions also ;)
 
No, 65swb45, I'm just a guy whose plates have been tossed, and who now needs to replace them.

In Step One, I attempted to contact Matt (after reading a thread about how he offered the type of duplicating service that I now require).

[Nothing but crickets in response to Step One, however]

Still needing plates from some vendor (any vendor), I then tried to find another fabricator online. The second vendor wrote me back that afternoon, saying that they certainly could fabricate what I needed, and asking me to provide them with physical dimensions.

I relayed this question to the ih8mud community, starting the present thread entitled "Quick Question" . . . .

Several members then responded, just to inform me that Matt fabricates this sort of duplicate. I told them that I knew this, and advised them that I had already attempted to contact Matt but that I'd gotten no response yet.

If Matt ever does contact me, then great--- we can talk about him fabricating my needed plates.

In the interim, however, I still need some plates, from some place.

The request for height and width clarification was made to the broader group, not to Matt the fabricator (who seems to be out of pocket right now).

If anyone has an FJ40 from the general period (late 70's or early 80's), and also has a tape measure, I'd very much appreciate them sharing the dimensions of their door plate. It does not matter to me whether the responding party is named "Matt", or "Mark", or "Melvin", or "Fred", or "John", or "Katherine" . . . . .

Thanks again,
I have felt your pain. The problem is our expectations in finding parts for these older vehicles.
We are spoiled with internet access and part searches. NLA is everywhere.
This forum is awesome but we have to recognize that a lot of vendors on here are one man business, Some of which will not answer a phone call or email. Frustrating for sure but that is a fact. They are doing all they can.
Other vendors on here do reply quickly. You will find them. There are some great vendors on here and some that are not so great. Some have reasonable prices and service, and some are not worth fooling with. You will find them also. I guess it’s part of the journey.
I have bought parts from all over this country and Japan to bring a 1977 FJ 40 back from the dead. 90 percent of the parts from vendors or individuals found on this forum, but there does seem to be some vendor police who want to keep us straight.
This is a different world, put out your bait (parts wants), generally in classified, and hope for a reasonable reply.
Work on something else until you hook up with someone that wants to help.
Good Luck on the journey.
 
Back
Top Bottom