Put pictures of the wheels you have in yours 80 series (2 Viewers)

[COYS]

I love seeing nice shoes on our 80s so for selfish reasons, here's a list of solid vendors who produce hub-centric wheels for our rigs in your typical 17x8-9" ranges with a bit more poke than factory wheels.

TOYOTA

SCS WHEEL MODELS DESIGNED FOR TOYOTA TRUCKS AND SUVs

www.stealthcustomseries.com

SSW Off-Road Wheels

SSW Off-Road offers quality products to get you on the trail, all at an affordable price. Choose from our selection of wheels, air compressors, air down tools, and more!

summit-offroad.com

Wheels

KMC Wheels has been redefining performance on and off the asphalt since 1995 with the relentless pursuit to confront possibility.

www.kmcwheels.com

RRW: Relations Race Wheels - Reinventing the Wheel

Maker of the lightest and strongest MonoForged Off-Road Wheel.

www.relationsracewheels.com

Some of my favorites from the above vendors:

If you want ultimate strength, lightness and quality, Forgeline recently released their TR11s USA-made from the same forged materials as they do for their motorsport clients:

 

[Broski]

WalkerEvans true bead locks 17 x 8.5 3.75 BS wrapped with 39-12.50-17 Mud Hogs

 

[Oneops]

love those beadlocks, they look sharp! Not sure about the TEQ badge on the side fender tho...

Thanks!
I go back and fourth with the stickers it was like that when I got it. My luck right now is all the paint will come off with umm lol so they stay.

 

[ajax1]

Picked up these for more tire choices and beadlocks 17x9 3.75 bs worn 35’sView attachment 2866939

View attachment 2866940

What kmc are those didn’t know they made anything with that back space for our trucks? Looks sharp

 

[ajordan1975]

can't go wrong w/ Raceline!

 

[LLCoolJQ]

My dream wheel would be Bradley V forged ones. I got the cast ones in 16x8.5 et-30 and still contemplating to get the forged ones in 17x8.5 et-30

 

[Marco Lau]

can't go wrong w/ Raceline! View attachment 2867654

second on Raceline beadlocks

 

[ajordan1975]

second on Raceline beadlocks
View attachment 2882944
View attachment 2882945

i dig those. are they factory black or did you paint / powder coat them??

 

[Marco Lau]

i dig those. are they factory black or did you paint / powder coat them??

factory blk. Might go with alum. rock rings next time around, but steel rings are pretty darn strong...

 

[RiverCityDave]

17" Toyota Steelies!


View attachment 2861887

Dude, the steelies are SOOOOO heavy. Safe to assume it doesn’t bother you? Toyota claims 22 pounds for the stock alloys (born out by my scale at tire changes) but those 17 inch steelies are 35 with some pushing 46 pounds. Safe to assume it doesn’t bother you but it blew my mind when I looked into it. they do look good though…

 

[NYIronPig]

Dude, the steelies are SOOOOO heavy. Safe to assume it doesn’t bother you? Toyota claims 22 pounds for the stock alloys (born out by my scale at tire changes) but those 17 inch steelies are 35 with some pushing 46 pounds. Safe to assume it doesn’t bother you but it blew my mind when I looked into it. they do look good though…

with my LS swap, not an issue one bit!

 

[jfz80]

I have some steel rims mated to 35"*12.5 R17 Toyo M/T:
Still trying to figure out a solution that would allow me to get rid of the spacers.

Why not just run without?

If those are FJC or taco rims should be 5.5” BS and minimal rubbing except when stuffed in rear or full lock up front and that part is doubtful in 35s.

I have a set of 16” OE alloys if you want to entertain as well.

 

[roflbox]

Why not just run without?

If those are FJC or taco rims should be 5.5” BS and minimal rubbing except when stuffed in rear or full lock up front and that part is doubtful in 35s.

I have a set of 16” OE alloys if you want to entertain as well.

Once things are running, I will run them without spacers for a while, the frame is nicely painted, so I should be able to see where I rub

 

[jfz80]

Once things are running, I will run them without spacers for a while, the frame is nicely painted, so I should be able to see where I rub

Rear wheel well. Rear of arch
Rattle cans are cheap!

 

[ThaiCruiser]

Would like to see if anyone run TE37 XT in 17". Easier to find tires in 17 than 16

 

[808keith]

Factory FJ / Early 4Runner for now w/Toyo AT's 35"

 

[Toy4Fun2]

Factory FJ / Early 4Runner for now w/Toyo AT's 35"
View attachment 2889650

Beautiful.
Maker? Model?

 

[808keith]

Beautiful.
Maker? Model?

I believe 2010-2013/2014 FJ Cruiser and 4Runner

 

[ZIFFFZJ80]

17x9 -12 trd inspired wheels with the center machined to 106.1. No spacers needed. Tires are 35x12.5 General Grabber X3.

 

[Plains Cruiser]

I recently picked up this cruiser with Level 8 "Punch" wheels already on it. I'm having a hard time deciding whether to keep them (I kinda like the look!) or do something different. I really like Method MR701 but I think I read they require the center to be bored out for 80 series?