Problems at the pump (not MPG)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 7, 2017
Threads
20
Messages
139
Location
Humboldt, CA
Was wondering if other have issues filling up. If I let the handle sit and don't physically hold the handle up (probably 4-6" at handle) while fueling, not only does it kick off constantly, but worse, fuel spatters out the tiny breather hole in the pump bellow (vapor capture thing) and also drips heavily from base of same rubber bellow. See video.



Pic of after running out the bottom. Note that this was only for a few seconds and all that fuel came up the bottom.

R4Z2G-zNbvb4hSl1tRm-fYeif3gO2vX1gtDiVmo35867Tp4NuZ5nEUO2Z1mlavatNXbAZZl5CqZIOsQLwPxIN3zAiwMJX-vYvBNYwPY939pVBPgu6711RlXmpTRrPlIvHBUtjpJLI_0=w2400
 
Pull the nozzle out more while you fill. It's shoved in too far.








That's what she said.....
 
I'll try it.
 
Okay. So, I didn't move :flipoff2:, but I did try fuel up with the nozzle out farther and same thing happens. I'm not the only member from CA. So, there's something going on here and it would be really great to be able to gas up without holding the damn nozzle up. Not to mention, when the attendants in OR are fueling up i hear them struggle to keep the nozzle from kicking off. Any other ideas that would cause this. Plugged canister?
 
Okay. So, I didn't move :flipoff2:, but I did try fuel up with the nozzle out farther and same thing happens. I'm not the only member from CA. So, there's something going on here and it would be really great to be able to gas up without holding the damn nozzle up. Not to mention, when the attendants in OR are fueling up i hear them struggle to keep the nozzle from kicking off. Any other ideas that would cause this. Plugged canister?
I was just thinking maybe the canister is plugged or blocked off somehow.
 
In the 100 Series, the fuel filler hose that attaches below the filler and runs to the tank has been known to delaminate or “collapse”, resulting in the same symptoms you are having.

Guys who have experienced it typically replace the part themselves and find it to be a one Banana job.

Thread here: gas tank slow fill, pump keeps shutting off

No idea if this would translate to the 80.
 
I have the same problem, I have to drive around and find a gas station that doesn’t have the stupid Healy vapor guard holes in the nozzle. I would say like 1/3 of Chevrons don’t have it, I try to go there.
 
I have the same problem, I have to drive around and find a gas station that doesn’t have the stupid Healy vapor guard holes in the nozzle. I would say like 1/3 of Chevrons don’t have it, I try to go there.
Not really FIXING it :hillbilly:

In the 100 Series, the fuel filler hose that attaches below the filler and runs to the tank has been known to delaminate or “collapse”, resulting in the same symptoms you are having.

Guys who have experienced it typically replace the part themselves and find it to be a one Banana job.

Thread here: gas tank slow fill, pump keeps shutting off

No idea if this would translate to the 80.
Maybe someone will chime in if it does translate to 80's, but I don't know if that's my problem as I can give mine full flow if I raise the nozzle handle. And for reference, I don't even have to raise it to the point where the vapor recovery brakes a seal with the filler neck.
 
For the mud information bank. I pulled the hose going to the charcoal canister at the pump today while filling up and did not have the issue at all. So, it is likely a bad charcoal canister causing this issue.
 
Yes on my Chevy it would do this the vent valve was clogged
 
Goatics, You'll find instruction in the FSM that tell you how to check the operation of your charcoal canister. There is a ball check valve mounted on the inside of the charcoal canister that you'll want to test. If you decide you want to cut your charcoal canister open to replace the carbon inside it, Here is a thread that tells you how to do that.
Charcoal Canister Modification- need help
 
For the mud information bank. I pulled the hose going to the charcoal canister at the pump today while filling up and did not have the issue at all. So, it is likely a bad charcoal canister causing this issue.
I was having the same issue, especially especially when hot outside. Charcoal canister seemed fine but it was the original so I replaced it anyway since it wasnt very expensive. Totally fixed the problem.
 
Back
Top Bottom