pat time conversion.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 31, 2010
Threads
694
Messages
2,820
I have to open the transfer case on my 94 to replace the rear output seal. I think I can easily remove the viscious cupler to disable the AWD....right? If I did this would I just need the aisin part time hubs. $300 or so from Slee. I already have a center diff lock and 7 pin. Is that all I need and is it worth it? The hubs without a disabled awd is pointless in my mind. What is the opinion?
 
Welded:
image.webp


Lokka branded spool:
image.webp
 
What is the primary reason people go with a part time conversion? I could see it making sense if there was a major increase in fuel economy (say 25%) however I don't imagine it would be all that much. I'm sure it makes sense for those that need it but part of the reason I went with the 80 was that all four wheels always had power, no need to shift into 4wd and go lock the hubs.
 
If my transfer need to come out then it is getting new gears for sure. So I guess this is a project for the future.

This all started just as a simple rear transfer case seel. But you know, the while you are in there....

But I guess for now I will leave it as just a rear seel replacement. If I open that sucker all the way up no way and I putting it back together with stock gears in it. So this will go down in the "possible future mod" list.
 
Last edited:
What is the primary reason people go with a part time conversion? I could see it making sense if there was a major increase in fuel economy (say 25%) however I don't imagine it would be all that much. I'm sure it makes sense for those that need it but part of the reason I went with the 80 was that all four wheels always had power, no need to shift into 4wd and go lock the hubs.

Many people do it to save wear on the front driveline. Also, helps with vibs when lifting if you don't want to go with a DC driveshaft.
 
^^^This^^^ plus steering effort and cornering when in rear wheel drive is a bit "sportier", less steering effort.
 
^That and it makes it a lot easier to get on back to the house if you break anything up front. Yes, you can remove flanges and remove the driveshaft, etc, but in my case that is all handled by 2 twists and a push of a button.
 
I'm kicking around if I want to do a pt conversion. I picked up a t case with marlins gears and spool for $200. All I need are hubs, axles cut and a button.

But, not sure if I want to be hopping in and out every snow storm and lose abs? It's my daily driver, so it probably doesn't make sense....
 
I'm kicking around if I want to do a pt conversion. I picked up a t case with marlins gears and spool for $200. All I need are hubs, axles cut and a button.

But, not sure if I want to be hopping in and out every snow storm and lose abs? It's my daily driver, so it probably doesn't make sense....

I doesn't. How's 350 shipped sound?

Thanks:hmm:
 
Last edited:
I may end up selling, but I plan on opening up and instslling new bearing and seals. I'll get to look inside and if selling will price accordingly. It'll be more than $350 though, but no more than a set of Marlins gears.
 
I've got a set of tg gears to install. I was buying this to install and then swap t cases, then the guy told me it was a converted part time case. I thought, what the heck....
 
I'm kicking around if I want to do a pt conversion. I picked up a t case with marlins gears and spool for $200. All I need are hubs, axles cut and a button.

But, not sure if I want to be hopping in and out every snow storm and lose abs? It's my daily driver, so it probably doesn't make sense....

Quite a deal and for the advantage of the gearing you wouldn't jump out of your truck to turn hubs?:eek:
 
Quite a deal and for the advantage of the gearing you wouldn't jump out of your truck to turn hubs?:eek:

It's my second 80. I may drop the tcase in my other one though (has tg crawler gesrs) and convert that one to pt. It's the loss of abs I'm having a hard time getting over, but honestly, it is something I've used a couple times in my life....
 
Back
Top Bottom