Parting out and '86 FJ60 in Rome,GA

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

who gets the left hand brewery sticker?
 
Brandon,

Glad your still interested! Hugh'll be in austraila for a few more days and since the trucks down at his place, he can get you detailed pics to your email when he gets back.

thanks,

todd
 
Brandon,

Glad your still interested! Hugh'll be in austraila for a few more days and since the trucks down at his place, he can get you detailed pics to your email when he gets back.

thanks,

todd

Cool! Any idea on price? I've got me eye on a really clean quarter right now, but I think the guy is going to want an answer quick...

Also, would you guys be opposed to cutting the quarter from the dog leg back and the window down (basically the entire bottom half of both quarters...)

Lastly, how is the RF fender/wheel well?
 
Cool! Any idea on price? I've got me eye on a really clean quarter right now, but I think the guy is going to want an answer quick...

Also, would you guys be opposed to cutting the quarter from the dog leg back and the window down (basically the entire bottom half of both quarters...)

Lastly, how is the RF fender/wheel well?
Yo! Oz has been great. Will be back in on the 30th. The quarters are rusted through just behind the tires but you may want them. I will post pics when I get home. As far as cutting the other, hell yeah! We are all about it! Somebody in the parts wanted section was looking for a windshield frame and I was hoping he would get back to us. I would rather we did not end up with taking bits to the recycler! The RF fender well is in great shape and off the truck as we sold off the right front fender already.
 
Sweet, if nothing else, I may take a LF quarter patch (I have a tear in mine from the PO jack-knifing his trailer) and I am interested in that RF fender. Also, how much for the right rear door (if it's not spoken for)?

Would these parts need to be picked up in GA? or could I get them in TN?
 
Sweet, if nothing else, I may take a LF quarter patch (I have a tear in mine from the PO jack-knifing his trailer) and I am interested in that RF fender. Also, how much for the right rear door (if it's not spoken for)?

Would these parts need to be picked up in GA? or could I get them in TN?
I am sure we could get anything you want up to Memphis, TN. I meet in Chattanooga with the STLCA there and we have a couple guys who go up to Memphis too so I am sure as far north as Memphis is no problem. We will make you the best deal we can considering the labor of cutting the parts out. When I post the pics, save them and use paint or something to show me where you want the cuts and then either email them or repost them. I am hangin' out in Sydney for a couple days before returning to Georgia! Just saw a sweet, brand new crew cab Hilux with a phat ARB:D

Right rear door is great. Pics above. Left rear is the bad one. Also the right front outer fender is gon. Left front one is in poor shape but has no rust. Inners are great. The doors we would like to get $200 each left side includes glass and all hardware.
 
parts

Looking for drivers side bump stop only.Also front bumper cap drivers side and rear bumper cap on passenger side if they are in good shape.Please pm me
Thanks!
 
OK everybody. I am back and have taken care of a few things at the house and have to catch up at work but will get everybody answered and pics posted as soon as I can. :cheers:
 
OKAY - figured this would be easiest.

sdbrassfield - pic of the license light assembly

04-01-08 004.webp

Goode - yes on the choke cable assembly and the windshield is in Goode shape. I can get it out in one piece but you will have to put it in!

87 HJ60 - look like we will strike out with you. If you think of anything else let us know.

Skinner - pics of the quarters. The passenger side has some rust through. May be repairable. Drivers has already been repaired. I can not tell by how much really but it looked like a decent job.

04-01-08 001.webp
04-01-08 002.webp

Sterling - Driver's side bump stop is out. $10 plus the ride? A pic below.. Driver's side bumper cap is trashed, I will throw it in the box if you want it for nothing. I am waiting to here if the rear bumper is gone or not still. Will let you know.

82-SOA-60 - (I know a TuTer will not come in here but here it is anyways) I have the drive shaft out, just need to seperate the yoke.
04-01-08 004.webp
04-01-08 001.webp
04-01-08 002.webp
 
Hugh,

I don't think the pass. side will work for me. However, it looks like the drivers side may work. Is there any way you can remove the interior trim panels and take a photo from the inside? Also, if it will work, would you mind cutting it like this:

FJ_cut_points2.JPG.jpg


FJ_cut_points.JPG.jpg
 
Last edited:
Skinner - I can do it. Jsut give me a bit to get it done. The quarter is actually new I think. Factory black primer inside. Here are the pics:
04-02-08 001.webp
04-02-08 002.webp
04-02-08 003.webp
 
Wheels. Anyone spoken for the wheels yet on the 60? They look to be in decent shape and I need some. How far is Rome from Charlotte?
 

Users who are viewing this thread

Back
Top Bottom