Parting complete 94 FZJ80

[bjowett]

Location

United States

I'm keeping many of the parts as spares, but I'm sure there something on there needed by another... Grey exterior, Tan leather/brown inside.

I may purchase another - engine, tranny, axles, let me know whatcha need.

 

[lagwagon]

I need a right side headlight assy or just the lense if the brackets are broken. Also if the front axle housing is good and you part that out I would be interested.
Thanks, Jeff

 

[stevek]

Would you want to part with the ECM?

 

[Mr.Bryan]

Hey man, I'll take the rear right interior pannel. Its the one all the way in the back with the fake subwoofer and the little storage compartment. Let me know what ya want for it.

-Bryan

 

[Big_Moose]

I'm interested in the antenna switch & the rear heater switch - How much?

 

[wdorry]

If she had lockers I need the wire harness that goes from the dash down the drivers side to the rear. If you have it let me know how much. Thanks Bill

 

[madams557]

I could use a power seat switch or two. I know your interior is tan and mine is gray, but a tan seat switch is better than the little metal piece exposed.

Also, I happened to break my factory stereo volume nob if that is something you have laying around.

And lastly, I've decided to go without my running boards. You don't by chance have the front mudflaps you'd like to see go.

Let me know on prices and availability.

Michael

 

[sjpitts]

I would be interested in the front seats, and possibly the rear third member--locked or unlocked.

Jared

 

[Hwn built]

I know I may be late, but here are some parts I need:
Antenna mast/rod
Possibly the front drivers seat


But let me know. Thanks.

 

[REDDER1]

I have a 96..
does your 94 have a grab hanle ABOVE the PS window?..(not the one on the pillar). If you have one..how much do you want for it?

Later..

 

[sjcruiser]

I'd need 1 grab handle & third row speaker harness (grills & brackets)

Please PM me if you still have them.

Thanks,
Frank.

 

[Safado]

sent you a PM.

 

[BMT]

If the parts you are keeping do not include the axles, I would take them off your hands.

 

[Chuck_FJ60]

Hello,

I'm looking for a left (driver's) side, rear bumper cover. It is gray color and goes to the rear wheel well. If you have one in good (no cracks or fading), I'll be very interested.

If you have it, please let me know what you want for it shipped to 77077 zipcode.

Thanks,

Chuck

 

[pappy]

I would be interested in the front third member, electric or otherwise.

Jon

 

[hpantier]

i sent a pm but if you have the drivers side rear bumper plastic corner, i would take it off your hands.

 

[96Cruiser]

if ya end up with an xtra set of alloys,let me know


doug

 

[Uglibus]

I sure could use the driver side tail light assembly.
Michael Aaron
Longmont, CO

 

[RJHR]

I want a rear diff, thanks.

 

[thelal]

I need a drivers front speaker.