OME Competition kits

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Go Frankies, 35's and don't look back.
 
Go Frankies, 35's and don't look back.

For your usage outlined above, I agree completely, which should be no surprise given my signature line :grinpimp:. The FOR ride quality completely unloaded is head and shoulders above OME, and it will handle the weight very well when you load it.

For Moab and Colorado, you will appreciate the 35's, and at Colorado elevations you really need to regear for either tire size (33's suck just as bad as 35's at these elevations...you bog down on the same hills with either size), so just do the 35's up front.

I think if you do OME medium and 33's you'll likely be upgrading within a year for the usage you outlined. 35's are by no means a requirement for your usage, but the 80 is a big rig and perfectly suited to run 35's, so dollar for dollar get the much higher quality springs and the advantages of being on 35's.

If you really want to do OME, don't overthink it and just get OME medium.

First pic is what it looks like on OME medium with 33x12.5 trxus MT's.

Second pic is FOR on 35" trxus completely unloaded.

Third pic is FOR on 35" trxus with 300 lbs of kid and cargo plus a 3,500 lb trailer hooked up.
OME on 33's.webp
FOR Unloaded Close.webp
FOR Trailer Load Close.webp
 
For some additional perspective on how big a tire the 80 can handle (remember I am flareless) on a smaller lift, below is OME medium on 35's. The second pic shows the distance to the bumpstop when the rear tire started to rub - about 1.25". 33's fit stock on an 80, which is why they look small on a 3" lift. OME doesn't design their spring and shock travel for 35's until you go up to the J/L combo, however, so those kits are not ideal for 35's even if you decide to modify them to work.

35's fill the wells nicely on OME medium and could be run on that lift if desired with just a 1.5" bumpstop drop in the rear and some much needed flare removal.

The last shot is a pic of the rock garden on Spring Creek showing how much more fun Colorado wheeling is on 35's. Of course, I got badly stuck on a stupid line shortly after this pic, but you wouldn't know that unless I told you :D
OME Medium on 35's.webp
35 Full Stuff Bumpstops.webp
Spring Creek Rock Garden 2007.webp
 
I second the simple lift (OME medium), or the newly touted FOR, due to minimal caster issues. I have had a caster battle with J springs, and now have come out on top using the Slee caster plates, but in retrospect might should have started with a smaller spring. Bumpers and add. weight are in the future, but not too soon.
 
I have had a caster battle with J springs, and now have come out on top using the Slee caster plates

I've posted a bunch on this. The kits as laid out only work for a weighted down truck. If you are light you then need to go with the next higher caster solution to get things to hit their targets.

And if you don't have them you should look at the need for adj panhard rods.
 
I second the simple lift (OME medium), or the newly touted FOR, due to minimal caster issues. I have had a caster battle with J springs, and now have come out on top using the Slee caster plates, but in retrospect might should have started with a smaller spring. Bumpers and add. weight are in the future, but not too soon.

Where can i get info on FOR lift? Thanks
 
Back
Top Bottom