ill trade you a wood stove for the welder
bump for a nice machine, wish i had the spare cash
||| Official YT For Sale/Trade/Wanted Thread ||| (1 Viewer)
- Thread starter mopar
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
ill trade you a wood stove for the welder
bump for a nice machine, wish i had the spare cash
Fs 1988 fj62
Hey guys.
I have a two tone (grey/blue) 1988 FJ62 with 151K on the clock. Engine is strong, with a minor rear seal leak.
tires are good / 30K on 31" BFG AT's on black steelies
new front rear brakes
she's stock as this was my daily driver for the last 4 yrs, I'm selling because I bought a 2001 4runner.
the bad:
usual rust on the rear gate, quarters, frame is decent due to undercoating from the factory.
front low speed accident : with dents to the stock bumper, right quarter and hood... Nothing major but need to be pulled
could be a good parts truck if someone needs a decent interior or strong engine.
thanks guys
Hey guys.
I have a two tone (grey/blue) 1988 FJ62 with 151K on the clock. Engine is strong, with a minor rear seal leak.
tires are good / 30K on 31" BFG AT's on black steelies
new front rear brakes
she's stock as this was my daily driver for the last 4 yrs, I'm selling because I bought a 2001 4runner.
the bad:
usual rust on the rear gate, quarters, frame is decent due to undercoating from the factory.
front low speed accident : with dents to the stock bumper, right quarter and hood... Nothing major but need to be pulled
could be a good parts truck if someone needs a decent interior or strong engine.
thanks guys
FREE STUFF- Going to the junkyard this weekend-
Power Washer- gone
2H bellhousings- 2 of them. with flywheels.
1 split rim
FJ60 front bumper- slightly dented but good
Power Washer- gone
2H bellhousings- 2 of them. with flywheels.
1 split rim
FJ60 front bumper- slightly dented but good
Last edited:
are the bellhousins cast iron
yes. heavy and dirty
I'm looking for a transmission crossmember for a 1991-92 80 series. Mine is twisted
Last edited:
$ 1800 OBO
Willing to do what I have to sell.
Willing to do what I have to sell.
My buddy is looking to sell his truck. He has just gotten it running real good and now he wants to sell it. 
The body has an alum tub installed by Teds guys in NH, looks real good. He has a hard top for it too. This thing would make a realy nice driver, finish the body work, paint and drive it!
77' FJ40
The body has an alum tub installed by Teds guys in NH, looks real good. He has a hard top for it too. This thing would make a realy nice driver, finish the body work, paint and drive it!
77' FJ40
My buddy is looking to sell his truck. He has just gotten it running real good and now he wants to sell it.
The body has an alum tub installed by Teds guys in NH, looks real good. He has a hard top for it too. This thing would make a realy nice driver, finish the body work, paint and drive it!
77' FJ40
Your buddy should throw a paint job on that otherwise I'd guess he'll get about half of what he's asking. Decent paint job would do his wallet wonders.
My buddy is looking to sell his truck. He has just gotten it running real good and now he wants to sell it.
The body has an alum tub installed by Teds guys in NH, looks real good. He has a hard top for it too. This thing would make a realy nice driver, finish the body work, paint and drive it!
77' FJ40
Ya and he'll need to throw a box of $100's in the back seat too.
Says the guy whos looking to buy a Maaco...
Hey, I didn't put the price on the rig, put the pictures up, or even say he was any good at selling things, all I know is he is in a jam $$ wise and looking to get out of his truck. Make him an offer, he might take it, he might not. Are you guys new to this stuff?
Just noticed on interco's factory 2nds page there's a few STREET tires for short money
XRXS-05R TRXUS A/T RADIAL 33X14.50R15 3 $125.00
XRXS-08R TRXUS A/T RADIAL 35X12.50R16 2 $125.00
I don't know how much 33s usually go for, but I know most 35" street tires come in around $200 a pop. These are not the Truxus mud tires, but the Truxus STS (AT).
Thought I'd give a heads up.
XRXS-05R TRXUS A/T RADIAL 33X14.50R15 3 $125.00
XRXS-08R TRXUS A/T RADIAL 35X12.50R16 2 $125.00
I don't know how much 33s usually go for, but I know most 35" street tires come in around $200 a pop. These are not the Truxus mud tires, but the Truxus STS (AT).
Thought I'd give a heads up.
I think I need more clutch throw since I switched to a HD clutch. Can anyone lend me a working 40/60 clutch master for mock up? I want to see if I can swap one in. I hear hints on the intarwebs that I can, but not convincingly enough to spend the money on one.
Wanted, late model complete hard top, doors, ambi doors
Hey guys im located in east hampton, ct and am looking to replace my very leaky very jacked up soft top with all hard parts. Anyone within the ne area that i could pick up from would be great and save lots of $ in shipping. Thanks
Hey guys im located in east hampton, ct and am looking to replace my very leaky very jacked up soft top with all hard parts. Anyone within the ne area that i could pick up from would be great and save lots of $ in shipping. Thanks
Hey guys im located in east hampton, ct and am looking to replace my very leaky very jacked up soft top with all hard parts. Anyone within the ne area that i could pick up from would be great and save lots of $ in shipping. Thanks
OEM soft top or aftermarket? I may be interested either way!
the po put it on...it leaks and the rear isin (however u spell it) is held together by tape.
I am looking for wheel spacers for my 40.
