Official ONSC member buying/selling thread

[TallPineCruiser]

I have a General Green Manufacturing bolt-on tire carrier for sale, complete with all bolts and hardware. Pictures are attached; the carrier is for the 93-97 passenger side. I have had it for right at a year, and it is an excellent design. I had a 35" BFG AT mounted on it, and had no problems while mounted on the truck. I am in Hartsville, SC, but I travel some for work so that I could meet within a reasonable distance. I prefer not to ship quite yet. $700 OBO. Thanks, Landon. Link to the product below, and it has been sold out for some time now.

80 Series Bolt On Tire Carrier | GGM

The GGM family is growing! My wife and I are expecting our first child! With that, I am taking a break from building anything for a few weeks until we get back into routine. For now, please sign up for notifications using the Notify When Available button. That way, when I open orders back up you...

www.generalgreenmanufacturing.com

 

[NCFJ]

Project truck, mine

SOLD Thread 'Chesnee, SC FJ62 on FZJ80 roller, LS3 Connect & Cruise package, New split case PROJECT TRUCK'

Dec 5, 2025

Break out your calculator and start adding everything up.
$35K
Don't bother low balling, it will not be received in good humor

-I have something different. A FJ62 body mounted on an FZJ 80 chassis. In this configuration the
suspension is at stock height.
- Dobinson progressive springs along with OEM new shocks to go with it.
-The frame is shortened, rear section raised to accommodate 62 body.
-Frame has been media blasted, epoxy primed and painted gloss black as have axle housings
and suspension components.
-Axles are rebuilt
-Under body, inner body floor, outer...

• NCFJ
• Replies: 15
• Forum: FJ60 | FJ62 | BJ60 | HJ61

 

[dloLC007]

ARB 63 Quart Zero - Greensboro, NC $950 OBO

 

[R.K.]

TrailGear/Longfield 30 spline chromo birfields, inner axle shafts, drive flange kit, and chromo rear axle shafts for an FJ40 for sale. All parts are new and uninstalled.

Located in Roxboro, NC

$800 for everything

 

[SPESeth]

I've got 2 brand new arb solis amber lens covers (SJB36LENA) for sale $20..I'm in Charlotte

 

[R.K.]

I’m going to clean out some FJ40 parts in the next few weeks. I’ll get pics as I go. Some of the items I’ll be listing for sale are:

Windshield frames
Late model hard top components
Doors
Drum brake axles
2F valve covers
2F air cleaners
Rear steps
Lots of misc items

Located in Roxboro, NC

 

[Malleus]

If the rear step is OEM, I need one

 

[TallPineCruiser]

Sold!

I have a General Green Manufacturing bolt-on tire carrier for sale, complete with all bolts and hardware. Pictures are attached; the carrier is for the 93-97 passenger side. I have had it for right at a year, and it is an excellent design. I had a 35" BFG AT mounted on it, and had no problems while mounted on the truck. I am in Hartsville, SC, but I travel some for work so that I could meet within a reasonable distance. I prefer not to ship quite yet. $700 OBO. Thanks, Landon. Link to the product below, and it has been sold out for some time now.

80 Series Bolt On Tire Carrier | GGM

The GGM family is growing! My wife and I are expecting our first child! With that, I am taking a break from building anything for a few weeks until we get back into routine. For now, please sign up for notifications using the Notify When Available button. That way, when I open orders back up you...

www.generalgreenmanufacturing.com

View attachment 4042644

View attachment 4042645

View attachment 4042646

View attachment 4042647

View attachment 4042649

 

[R.K.]

If the rear step is OEM, I need one

I have two, both are OEM. Will send pics.

 

[Malleus]

 

[R.K.]

Windshield frame for a late 60s-early 70s FJ40 for sale. Excellent condition. Hinges included.

$200

 

[40LandCruising]

Anyone have a stock 80 birf laying around they wanna sell? Guy from the Clemson Offroad club grenaded one this weekend and needs a replacement.

I do in fact have a hoard of 80 axles in my garage, but they are currently all complete and I'm hesitant to rob parts off any of them at the moment.

 

[jfz80]

Anyone have a stock 80 birf laying around they wanna sell? Guy from the Clemson Offroad club grenaded one this weekend and needs a replacement.

I do in fact have a hoard of 80 axles in my garage, but they are currently all complete and I'm hesitant to rob parts off any of them at the moment.

I’ve got an OEM one here in Madison. Replaced as part of PM at 200k

I think @thecapedcapper bought my other spare and is a lil closer.

 

[thecapedcapper]

I’ve got an OEM one here in Madison. Replaced as part of PM at 200k

I think @thecapedcapper bought my other spare and is a lil closer.

I'd bought your rebuilt driveshaft and a window but no birf, that stuff moved on with the truck too anyways

 

[40LandCruising]

I’ve got an OEM one here in Madison. Replaced as part of PM at 200k

I think @thecapedcapper bought my other spare and is a lil closer.

View attachment 4049362

How much you want for it and would you ship it?

 

[jfz80]

$75 shipped ?

 

[R.K.]

I have two, both are OEM. Will send pics.

@Malleus Here they are. Both have had holes drilled that could be welded up.

 

[Malleus]

Thanks! How much rust was under the primer before it was laid down?

 

[R.K.]

Thanks! How much rust was under the primer before it was laid down?

It was sandblasted, it’s is great condition.

 

[R.K.]

2F cylinder head for sale. Condition unknown.

Located in Roxboro, NC

$50