malteserunner
Dr Evil
It's a '91. Thanks!
Official 37" and up picture thread (6 Viewers)
- Thread starter slow91fj90
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Just upgraded to 37" Cooper STT Pros (true 37s).
Specs:
Slee 4" Lift Kit with DC Drive Shaft
30mm front spacer
Slee armor (front, rear, sliders, skids)
Warn 9.5XPS
17" 4th gen 4Runner Sport Wheels
1.25" Trail-Gear Wheel Spacers
Factory Lockers
Specs:
Slee 4" Lift Kit with DC Drive Shaft
30mm front spacer
Slee armor (front, rear, sliders, skids)
Warn 9.5XPS
17" 4th gen 4Runner Sport Wheels
1.25" Trail-Gear Wheel Spacers
Factory Lockers
Got 37s?
I just did!
Finally, three sets of tires later in 1.5 years...
I really didn't think they would fit without major modification, so I went 315s.
Since I did a lot of reading here on IH8MUD and found that it was very possible.
A shout goes out to all the people who did it before me & documented it here on IH8MUD. I went with the Arizona Boys method of fitment. Special thanks goes out to @Tools R Us & @richardlillard1 .
I choose to go with a 4.9"/125mm back space 4Runner wheel & 1" spacers. They do come very close to everything with some very slight rubbing. With some small tweaks I should be able to flex it out worry free.
I have 2.5" suspension lift with a 1" body lift.
Basically a 3.5" lift. Cooper ST MAXX tires spec out to be a tad taller than the STT Pro.
I just did!
Finally, three sets of tires later in 1.5 years...
I really didn't think they would fit without major modification, so I went 315s.
Since I did a lot of reading here on IH8MUD and found that it was very possible.
A shout goes out to all the people who did it before me & documented it here on IH8MUD. I went with the Arizona Boys method of fitment. Special thanks goes out to @Tools R Us & @richardlillard1 .
I choose to go with a 4.9"/125mm back space 4Runner wheel & 1" spacers. They do come very close to everything with some very slight rubbing. With some small tweaks I should be able to flex it out worry free.
I have 2.5" suspension lift with a 1" body lift.
Basically a 3.5" lift. Cooper ST MAXX tires spec out to be a tad taller than the STT Pro.
Last edited:
lumbee1
Native American
I LOVE this combination. I stuck with 315 STT Pros and the original 16x8's for more driver friendly road manners.
malteserunner
Dr Evil
Last edited:
malteserunner
Dr Evil
Just thought I'd post updated pics. Everyone loves pics, after all.
malteserunner
Dr Evil
Thanks! That dump truck is in a new location, daily. We're constantly dodging that thing.
what back spacing on your rims? and do you run spacers?
malteserunner
Dr Evil
No spacers. I didn't measure backspacing, but my wheels are 9" wide with -64 offset. With my high school education, I come up with 2.75" backspacing.
2KCruiser
Everything 2KRacing, practically live here
After owning a few 80s, I finally got a rig worthy for the 37's
17x9 with -12et offset with no wheel spacers
37x12.5x17 BFG KO2
J springs with MT 1.5" Front Spacers / Fox Shocks
17x9 with -12et offset with no wheel spacers
37x12.5x17 BFG KO2
J springs with MT 1.5" Front Spacers / Fox Shocks
Dirty Koala
SILVER Star
what front bumper is that?
2KCruiser
Everything 2KRacing, practically live here
Yup ^^^
@Charles4x4 what led bar is that on your short bus? Trying to do the same thing, but don't want to drop all the money on the slee bar.
2KCruiser, what wheels are they? I really like that look.
2KCruiser
Everything 2KRacing, practically live here
Wheel model is MB11 if I remember correctly.
itbrokeagain
SILVER Star
I think I may have posted here but I don't remember where or when
91 with a 4 inch ome and some trimming. 38 inch tsls
91 with a 4 inch ome and some trimming. 38 inch tsls
itbrokeagain
SILVER Star
The 3fe is almost not enough
