offenauser intake

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 7, 2004
Threads
81
Messages
484
Location
Val-David
Is there any reason why i'd like to put a q-jet on my 2F? I know this is one of the best carb, but .... on a 2F????
offenauserinatke4.webp
 
I think it would be to much carb. When I had my F, the stock carb was awesome. I should have rebuilt it instead of getting a weber. The weber was great on road but sucked offroad.
 
IMO, the only reason to run the Offy is if you have done mods to your motor that can take advantage of the increased airflow. Custom cam, headers, exhaust, etc. If your motor can't exhale better than stock, a big intake and carb is not very beneficial.
 
I had a 500cfm 4 barrel carb on a 2f with that same intake .Don't know what was done to the rest of the engine but it seemed to run well.Still have the carb if you're interested.
 
froggy said:
Is there any reason why i'd like to put a q-jet on my 2F? I know this is one of the best carb, but .... on a 2F????

You will get better flow and atomization out of that intake. Better performance and maybe better milage. Find a carb around 500 CFM like Too Tall has and slap er on. Put on a header too. People automatically think of less milage with a 4 bbl, but haveing more jets and venturies will operate more effiently.

DO IT! :D
 
That intake and a 390 cfm carb (with vacuum advance) will provide very good low end throttle control and good atomization. I would not run a 500 even with proper jet changing. A Q-jet is too big. Also, Q-jet carbs are spead bore carbs and without another adapter plate would not bolt to that intake.

Be sure to run a heat sheild between carb and header, do not run an open element air filter.


Rice
 
What is a good price for this intake?
 
Assuming a redline of 4000 rpm (hp peak is 3600) and VE of .8 (maybe optimistic?), the 2f takes about (cid x rpm x VE)/3456= (250x4000x.8)/3456=231 cfm; which it seams that the stock carb would be OK for. Plus, I don't think I shift my fj-40 anywhere near 4000 rpm. Without increasing the rpm (not really suitable for the 2f) or increasing volumetric effeciency (higher lift cam, etc) a big carb is not needed. For low rpm torque a big carb won't help (although a 4 barrel with small primaries and large secondaries wouldn't hurt.

My feeling is the the 2f is a real nice low rpm motor that makes good torque at low rpm, but is not well suited for high speed/ high power use, which is where a 4 barrel carb would be come in. If you want power, the chevy v8 might be better way to start.

All just my opinions.
 
Are you selling or buying the intake? Pm me if you're selling. I just bought an 85 2F hi flow intake but this gives me another idea.
 
Are you selling or buying the intake?
Sorry I don't have one, I'm just taking some information for futur modifications.
I'm not sure about going big with the 2F or changing to V8....
 
I have an "Offy" I am looking to sell. It has adapters for a TBI set-up, and has been slightly modified too. PM me if interrested.
 
here are a couple pix:
 
Bsed on the increase in airlow of an Offy, would adapting a Weber 38 to one help with the notorious rich problem with these? Just curious. Hell I just may give it a shot and see for myself.
 
green73 said:
Bsed on the increase in airlow of an Offy, would adapting a Weber 38 to one help with the notorious rich problem with these? Just curious. Hell I just may give it a shot and see for myself.

The Offy actually has less airflow than the hi flow intake you've got installed. The major advantage is the dual port bit, when used in conjunction with a 4 barrel, it keeps the air speed up at lower rpm.

Have you thought about trying to run a Megasquirt with the throttle body you already have?
 
Back
Top Bottom