Newbie!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 12, 2009
Threads
4
Messages
12
Location
Utah
Hello, All. I am a newbie to Toyota LC. I had no idea about these machines until now. So, now that I am getting in the loop (and just bought 2). I need some advice. Bought a '96 with 144,000mi. Great suv, love it. Bought a '97 with 176,000. Exterior in great condition. Don't even have the plates yet and the power steering just went out and the engine blew up. I am in to it $9000 ($7500 purchase, $1,000 taxes fees, $500 new engine seal, diff and trans flushes, oil change). Silly me, bought it to spend less and get out of debt, but still drive something that my husband could feel cool in and have the space he needs to haul things around. Toyota is not supposed to blow up at 177,000 miles on the freeway. Is this a sign that the previous owners really abused the car? Should I sell it before I have any more major problems? We have never owned high mileage vehicles, so I am a little freaked out at this point. We have a good mechanic that I trust who doesn't charge us an arm and a leg, experienced with imports, but hasn't done much work on LC. Any advice would be great.
 
POs tend to not take care of vehicles, thats why the first thing we always recommend is baselining the vehicle to bring it up to where it should be.

That includes replacing all the fluids, doing the front/rear axle, Brakes, Spark Plugs, wires, Dist cap, rotor

and to go through and fix whatever else needs fixing.

Any used car will have problems because there is typically a reason why someone is selling and if they know they are selling they back off any PM required.

When you say blew the engine, do you mean the head gasket? That has happened to a few 80's and there is a test called "the bubble test" that would have shown there was a problem.

If it needs a new head gasket, then I would recommend doing a valve job as it will really help the performance.

This site will help you through most any problem. If you or your husband are willing to do some of the work your self, we have very detailed how to's on most maintenance activities.

Start with the FAQ for 80/LX450 series near the top of this sections main page.

Good Luck
 
Your engine probably did not "blow up". It isextremely rare to destroy these engines, Head gaskets are a somewhat common failure, but unless you drive it for a while with no coolant, or no oil, it is tough to kill these engines beyond the point they can be repaired. We need a whole lot more information to give you good advice about your LC. What happened, what led up to it, what did the mechanic say is wrong with it. Does it start or turn over at all when you try to start it, did you drive it while it was overheated... If it had a sudden huge cloud of steam and fluid spilled all over, it could be as simple as the PHH (Pesky Heater Hose), a $5 hose that is very difficult to see or access on the side of the engine... Give us more info, and we will see if we can help. A high mileage 80 series would be 200-300k, IMHO. The engine design is for 300k before rebuild.
 
My husband heard a clunking in the engine for a couple minutes, followed by and loud noise. There was smoke coming from the engine and oil all over the engine. Our mechanic is going to take a look at it on Monday. His buddy said it sounded like he threw a rod.
 
Sounds like a good reason to drop a GM 5.3 or the likes in it. :D But the cheapest way out may to be just get a junkyard motor and rebuild it.

Definately need some more concrete evidence before we can make an evaluation as whether or not to try and save the motor you have.

D
 
I'll let you know what the mechanic says on Monday. How much are we talking for rebuilding a junkyard motor? Thanks.
 
Ouch, that doesn't sound good. Keep us posted on whats up. The more info the better the 'mud people can help to evaluate a fix/options.

BTW Welcome to 'mud :flipoff2: (official welcome salute).
 
Where are you located, that might help pinpoint help better. If you were in the Denver area I would have you get a new engine from Oleg at IRBIS and hire Robbie (Powderpig) to do the job
 
There is a club in Utah and depending on what part can provide a reliable resource for advice and trusted shops. If your mechanic is not real familiar with these vehicles, you should investigate others. I know the mechanic I mentioned travels a lot across the country. 5 guys on here hired him to come to LA to do their head gaskets all at once.

You might want to log into this board from the local Utah Club

WC Forums - Powered by vBulletin

I would update your information via the USER Cp above to include your location and the types of vehicles you have. That will help in the future relative to answering some questions
 
Thinking about your original problem

The power steering went out and the engine blew up

A loose crank bolt will make the power steering go out and stop running the oil pump which will . . . .

My crank bolt was loose after the supercharger was installed. I quickly fixed it.
 
Hey Singer Welcome.
I thought I was having a bad day when my cruise control went out. (easy fix I guess) I hope all goes well for you. This forum should really help you out. I couldnt do it without these guys.(gals)
 
Wow. That is a scary thought that possibly such a simple thing could now cost me a ton of money. I found a short block for $400 on that sight that was recommended. How much does it cost to install one of these. Am I better off with a long block for $2495?
 
What new engine seal did you have replaced? Was it the front crank seal(price a bit high for that)? If the last person to work on it did something with the front crank. He may be responsible for this.
Used long block for 2595 is a bit high, unless it is really low miles. There is a used Long block here in the denver region for 1500(Irbis). With any used engine you would be a head to have the Head Gasket done before it is installed into the trucks. A bit more money at the time, then it is no worries(much much easier to do on a engine stand.
 
Back
Top Bottom