New sticker

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 18, 2004
Threads
259
Messages
1,501
Location
Pacific Northwest
No more lines.
P1000964.webp
 
Is that a heep drinking a beer on the DS door? Might want to post in the "other 4X4 Tech" section too.:D
 
Is that a heep drinking a beer on the DS door? Might want to post in the "other 4X4 Tech" section too.:D

The first LC to arrive in Mexico was the 2004 100. The guys in the club drive mostly Jeep wranglers because that is the only good option down here. They all like the 80...... only Americans can own an 80 in Mexico. One or two have a toyota 4Runner solid axle but only a few are down here imported in the early 90's. One guy has a 12V diesel Ram, and a few samurai's.

Tecate paid 50%, My part was $235......

Good before shot.
P1000282.webp
 
If you get a wrap done, you can expect anywhere from 15-22 bucks a sq/ft/ If you only paid $235 and they picked up the other half....you got a deal. There is more than that in material costs alone from a sign shop. I wrap vehicles all the time owning a sign shop, so for less than $500, somebody got bent over on that one :)
I'm not a flame guy, but I do like trucks that look different. Nice.
If they used a nice laminate, it'll take plenty of dragging on rocks to show any scratches. I had to flop my rig to even get past the laminate :)
 
So, how do you get parts for the FZJ in Mazatlan? Do you order your parts from border line states (TX / AZ) Toyota dealers & bite the bullet on shipping?
 
If you get a wrap done, you can expect anywhere from 15-22 bucks a sq/ft/ If you only paid $235 and they picked up the other half....you got a deal. There is more than that in material costs alone from a sign shop. I wrap vehicles all the time owning a sign shop, so for less than $500, somebody got bent over on that one :)
I'm not a flame guy, but I do like trucks that look different. Nice.
If they used a nice laminate, it'll take plenty of dragging on rocks to show any scratches. I had to flop my rig to even get past the laminate :)


Are there any specific wrap suppliers you suggest going with?

We're thinking about making our shop a Camo style wrap dealer and using my rig as a rolling ad :o

Been hitting up all the wrap companies for wholesale info and it seems they all pretty much use 3M :meh:
 
I especially like the drinking and driving message on the door :beer: Lol
 
I especially like the drinking and driving message on the door :beer: Lol

That's how they do things down there. Just about anything goes unless the cops think they can extort you for some $$$
 
Are there any specific wrap suppliers you suggest going with?

We're thinking about making our shop a Camo style wrap dealer and using my rig as a rolling ad :o

Been hitting up all the wrap companies for wholesale info and it seems they all pretty much use 3M :meh:

3M is the top dog, but don; be afraid of oracal and LG. Stay away from avery, far away, but any wrap is only as good as the installer....so let that be the word to the wise :)
 
I sell the printers that installers used to do the wraps - these can be tough buggers and great protection for the trucks.

The wraps cost depends on the installer (see above post) and how much work they do to prep the vehicle. Really good / vain installers who care about their rep will remove all marker lights, some trim, emblems that are covering paint. This adds up to $$$. Then you get into how they like to install. I know guys who have wrapped a stable of lotus club race cars with a single piece of meterial - no seams. Great for durability and wear - nothing to peal, but takes a really good installer to do it. For that, they will charge upwards of $3k per vehicle.

I don't deal with a lot of cheap installers, but $500 for a so-so job seems about right. I inquired about getting my cruiser done in a matte black (looks SIC!) and was told it would be about $2k (same as a paint job) by a pretty decent installer.
 
Been hitting up all the wrap companies for wholesale info and it seems they all pretty much use 3M :meh:

3M is kind of the Gold standard. If they are using a 3M ink in the printer, it can qualify for the 5 year MCS (Matched Component System) warranty for material and labor. Realistically, a wrap in a sunny climate will not last that long, but if it fails prematurely, they cover labor. This does not include trail rash...
 
Back
Top Bottom