new 80 member

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 17, 2006
Threads
62
Messages
1,948
Location
Pacifica CA
Hi folks, I finally picked up a locked 80. It was formally owned by demetre and I believe one of the early 80 series to tackle the Rubicon. It was also the vehicle that demonstrated how inadequate arb slider steps are at protecting an 80. As the new owner I am stuck on whether to wheel it with its predented rocker panels and just not worry about them or replace them with heavy square tubing Piggy style or take a slide hammer to the panels and straighten them just enough before I deflare/herculine them and bolt on some sliders . i have pored over the list/archives and cant find any one who has chopped out the rocker panels and replaced them with heavy tubing. Aside from the rockers this cruiser is just what I was looking for.
 
Standard issue 1993 fzj80. favorite features are the factory lockers, cloth seats and no airbags. It has a 2" OME lift installed. Not sure what combo of different springs, fender trimming, spring packer or mild body lift it will take to clear larger tires (35"). There is a lot of info on mud that I have to catch up on. Here is a picture of the 80 driven by the previous owner testing the arb side bars (notice i dont call them sliders) on the Rubicon.
http://tinyurl.com/ypkhgm
 
:flipoff2:
 
Welcome:flipoff2:
 
welcome to hell!:)
 
Let's see some pics!
 
I wonder if Slee, IPOR, Metaltech would use that picture to help advertise their sliders over the "competition"...

Gruesome, but guess the ARB stuff is meant to keep moveable things off the rig.
 
so here are the stats and pic.s
The good.
137,000 miles for $6000 from the second owner who supplied me with all the receipts (he even had the boxtops from the oil filters). he threw in the new inner seal and felt for the axle that he did not change leaky seals on yet, along with the new pads for the rear brakes. It allready has an angle iron protector for the power steering line and extended diff breathers. OME 2.5 mediums, not my first choice of springs, but they will do for the time being.
clean cloth pass.webp
factory lockers.webp
Passenger.webp
 
more piks

The bad
factory roof rack and dented rocker panels
I live about mile from the Ocean and throw salty sea kayaks on the top of trucks on a regular basis so a little rust is no big deal. The rocker panels are ugly but the doors still seal and this will be trail truck. I will pull them out and bedline them when I deflare. if I cant fix them then This will be the first 80 that I know of to have 2x4 steel body mounted (piggy style) rocker panel sliders.:skull:
factory racks.webp
pre dented.webp
pass. rockers.webp
 
dents schments!!! thats a score at 6k with a bunch o receipts/history for those miles. nice find!

Id remove the rest of that rust-laden rack asap- throw on some durabak-good to go.

You got the lift already to boot.....id throw on some 255/85s - a thule rack for your kayaks--and you are set.
 
Making it mine

Plugging nutsert holes after the rackectomy and also a runningboardectomy. Rather than buy 1 missing centercap I removed them all. p.s. Anyone need ruuning boards, factory rack or center caps?
holes plugged.webp
rngbrdectomy drivers.webp
rngbrdectomy pass.webp
 
WOW, exactly the same first three things I did to mine! Cept I painted my centercaps and put'em back on.

Welcome!:flipoff2:

Polak
 
Short list of cheap stuff still to do. (and some not so cheap stuff)
Fluids
axle seal
install trailer brake controller.
add center diff lock switch
axle diff locker in high mod (for mud or sand)
drivers window switch mod
install the yakima racks (that used to live on the fj62 I had)
deflare/bedliner
tires (not cheap) would like some 35" (with a 1" spring packer and 1 inch body lift and trimmed fenders (if necessary) or bite the bullet for Frankies 3" but realistically am not prepared for the expense of 4.88'/5.29's yet (and I will be towing a 2,900 lb tent trailer) so i will attempt a little self control and keep the tires and springs a bit more modest as this is still the minivan/ tow vehicle.
There are a lot of bumper/slider/skid plate choices out there, I am leaning towards light weight/high clearance tube bumpers and small winch.
 
Back
Top Bottom