- Thread starter
- #561
few more
Last edited:
Builds Mission Impossible......My 74 & 76 Build up by a Top Gun Land Cruiser builder :) (2 Viewers)
- Thread starter apeterson
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Good Gawd man, get that Tennessee Poison out of their young hands!! Unless you're out of Turkey........then, maybe.
Ed
Ed
- Thread starter
- #563
Good Gawd man, get that Tennessee Poison out of their young hands!! Unless you're out of Turkey........then, maybe.
Ed
Ed........... Come on.... I would not waste any of my good wiskey on chicks...........
PS Turkey flew the coop...... only drink that with my "weekend friends"
Uncle Aaron! Nice photoshop tricks with the "chicks." 
If they really were there, it must be an accounting favor... You certainly didn't lure them in with your prowess in the sack...
I am throwing away the giant batch of monster cookies I made for you.
--Shannon
PS: Please get that girl out of my seat in the Red Truck IMMEDIATELY!
If they really were there, it must be an accounting favor... You certainly didn't lure them in with your prowess in the sack...
I am throwing away the giant batch of monster cookies I made for you.
--Shannon
PS: Please get that girl out of my seat in the Red Truck IMMEDIATELY!
- Thread starter
- #565
Uncle Aaron! Nice photoshop tricks with the "chicks."
If they really were there, it must be an accounting favor... You certainly didn't lure them in with your prowess in the sack...
I am throwing away the giant batch of monster cookies I made for you.
--Shannon
PS: Please get that girl out of my seat in the Red Truck IMMEDIATELY!
The "accounting favors" were paid back after I finished that Knuckle and that Jack... hummmmmmmmmm Think I will save those pics just for me....
I love the Blue MM ones!!!!!!!!!
Even though those seat covers in the yellow truck are suppose to be water proof, I don’t want to find any more “unusual” stains on them. And, you might want to mention to the girls that the black dog had an accident in the back seat.
- Thread starter
- #567
Even though those seat covers in the yellow truck are suppose to be water proof, I don’t want to find any more “unusual” stains on them. And, you might want to mention to the girls that the black dog had an accident in the back seat.
I remember that....... hahaha.... "where is fav???" CLEANING UP s***!!!!!!!!!!!!!!!
I paid for a star so hopefully I can start a thread in a day or two. Thanks for the advise. I could look at fj40's all day and get jealous of all the different type of toys that everyone has on here. When it comes time for the roll bar are you gonna upgrade or keep it stock?
- Thread starter
- #569
Stock for right now.. but MILLHOUSE is going to help me make one when I am ready ... I still have not decided how or what exactly I want it to look like so that is why I am just going to put stock one back in for now..
Last edited:
rsbcruiser
SILVER Star
The woman with the Tert hat, her bezel is upside down! Let her know.
roll bar
I saw the ones that your garage crashers had and I like em. I am staying stock but I would like something more to stableize that front windshield some. It kinda rattles too much for me but we will see. I am a little behind you on my build but like your progress and the more pics the better. Not too much off roading here in Fl so mine is more street than anything. I also liked the tire rack with the cooler holder cause there is plenty of beach here!
The defense department regrets to inform you that your sons are dead because they are stupid!
I saw the ones that your garage crashers had and I like em. I am staying stock but I would like something more to stableize that front windshield some. It kinda rattles too much for me but we will see. I am a little behind you on my build but like your progress and the more pics the better. Not too much off roading here in Fl so mine is more street than anything. I also liked the tire rack with the cooler holder cause there is plenty of beach here!
The defense department regrets to inform you that your sons are dead because they are stupid!
- Thread starter
- #575
well got that knuckle on last night... ended up taking it off again because I am a tool and put the bolts on backwards in the dust cover... just all boils down to trying to do something too fast and not paying attention to what I am doing.... not smart................
That is not all............... when I was putting the hub on the pass. side the inner gear broke. The gear itself did not break but where the groove that the snap ring fits in broke out the back side.... This again was my fault... I was using too much force to put it on.... this side has seemed to always go on and off more difficult, but I should not have been forcing it as I was!!!!!!!!!!!!!!!
Also Steve brought up about 50 belts for me to see if he had one that would work for my power stearing pump... but ofcourse none did... not even one close so we could at least have a starting point... hope we can take a measurement this weekend....
So not much worked out for me last night so needless to say it was not a good or fun evening of working...
"some day we will all laugh about days like today!!"
That is not all............... when I was putting the hub on the pass. side the inner gear broke. The gear itself did not break but where the groove that the snap ring fits in broke out the back side.... This again was my fault... I was using too much force to put it on.... this side has seemed to always go on and off more difficult, but I should not have been forcing it as I was!!!!!!!!!!!!!!!
Also Steve brought up about 50 belts for me to see if he had one that would work for my power stearing pump... but ofcourse none did... not even one close so we could at least have a starting point... hope we can take a measurement this weekend....
So not much worked out for me last night so needless to say it was not a good or fun evening of working...
"some day we will all laugh about days like today!!"
Coolerman
SILVER Star
- Joined
- Jan 5, 2004
- Threads
- 142
- Messages
- 6,771
- Location
- Paint Lick, KY
- Website
- www.globalsoftware-inc.com
So did you get the leaking brakes fixed?
I would have had to been sedated to work on the pole barn that high off the ground! (Course if the Turkey was flying around maybe they all were? )
In that pic of the truck towing the long trailer, surely it was not pulling BOTH trailers?
I would have had to been sedated to work on the pole barn that high off the ground! (Course if the Turkey was flying around maybe they all were?
)In that pic of the truck towing the long trailer, surely it was not pulling BOTH trailers?
How bad were your hubs? I got one on the front end that turns a little slow but it is the longer shaft and I didn't notice anything wrong when I drove it before.
Jesters Dead!
Jesters Dead!
- Thread starter
- #578
So did you get the leaking brakes fixed?
I have not put the calipers on yet... got to tap the bolt hole because the thread on one of them got cross threaded... I did not have a tap big enough for that... MILLHOUSE is bringing that for me today...
I would have had to been sedated to work on the pole barn that high off the ground! (Course if the Turkey was flying around maybe they all were?
I just have to use my NINJA skills and not think about how high I am... and that I am trying to carry tin and balancing and walk on 2x4... No turkey or anything until after the roof...
good rule I made for myself....Oh yea it was.............( and did for about 150 or so miles) That Is MILLHOUSES rig... he wanted to be able to drive his LC up on the trailer and have the tin in between the wheels but it would not fit so he welded a trailer hitch on the back end and hooked them all together....
funniest thing is he stepped out of his truck and he was wearing a Tshirt that said.... "I am sure it is safe, I weldered it myself!!" I wish I had a pic of the shirt.... hahahah.... I damn near pissed my pants I was laughing so hard.............. Steve do you have that pic???
- Thread starter
- #579
they turn real easy.... the one just goes on the axle and seems tighter than the other side... once it is on works fine...
Coolerman
SILVER Star
- Joined
- Jan 5, 2004
- Threads
- 142
- Messages
- 6,771
- Location
- Paint Lick, KY
- Website
- www.globalsoftware-inc.com
Holy crap! I know the tow rig would have no problem pulling it, but was it stable at highway speed? Seems like it would want to sway a bit?
I have seen up to three trailers being pulled by tractors in Utah... Got me to thinking...
Yeah I was kidding about drinking while working, especially up in the air like that. I have vertigo really bad...
Lets see that pic!
