Max speed for locking the Center Diff?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yes....it's those tight turns that can slide ya with the CDL locked.

Here's my experience. If you have the diff open, with any application of power the car will push the front out on Ice. With the locked center diff, any throttle in a turn on ice will first yield oversteer, then understeer as the back end loses traction.

What most don't realize too, is that on ice a spinning axle (open diff) can cause loss of control quickly. In a locked diff, the axle speeds cannot ever be faster than the other, which tends to temper sudden loss of control. Again, the understeer then becomes predictable.

Please don't think for a minute that I speak to Ice racing. At Steamboat, these are road cars (race cars are welcome), daily drivers 99% of them. This is advanced car control, not racing at Steamboat. In fact, racing is forbidden, and there is no timing or soring allowed at the track.

The trick to the laws of physics on a awd vehicle is to predict how the awd will behave on ice. There is no question in my mind that the locked center reduces the variables needed for vehicle control.

ST
 
Ok, lets talk about dynamics. Most would agree that running 33-37" tires also increases the binding forces imposed in a turn. Especially compared to some 22"tall tires on an Audi. Not the same thing as an 80.

This is like saying that locking the diffs doesn't add stress to the birfs and r&p. It does add stress, from the t-case to the diffs. That is why in my truck it says:

Lock CDL- when losing traction at one or more wheels.

Not a chance of losing traction. Why use it?

I agree higher speeds at not a issue.
Dan, can you PM Sumo the price for a t-case rebuild kit?:grinpimp:
I'd be more interested in sales history of that kit.

Binding is binding. It's not the tire height, it's the tire traction. It's the same as 17in sticky hoosier gummy 255/40's. Extreme turn while accelerating causes birf failure, btdt with hundreds of cv joints.

Why use CDL in everyday driving? Because it's a good way to have better chassis dynamics. It's a good way to understand your CDL vehicle dynamics *BEFORE YOU NEED TO UNDERSTAND THEM".

This is strictly mindset IMO/E. I'm much more interested in vehicle dynamics of awd, this breakage/bind thing is a lot of unfounded opinion. It might be nice to work this over to some FAQ on the 80 equipment in terms of what it is and how it works. Then move on to the vehicle dynamics.

I read a LOT of misunderstanding and myth in this thread, even if I throw the bone that the center diff breaks when locked on pavement.

ST
 
I find regurgitating hardware operation boring Shotts. Put it in and make it do something on a truck wtih a steering wheel and a couple pedals.... Maybe some ice... Now you are at my table :cool:

ST

I don't have the chance to drive on ice that much, but since putting a Jeff Gordon sticker on the back window, I find I can get up to 90mph, hit the switch, and bring the front wheels off the ground.

It helps a little if I have my stereo up loud or a Jeff Foxworthy cd in.
 
I just remembered this thread from a while ago and thought I'd see if anyone went to steamboat to challenge Sumotoy's assertions.

I still don't think cdl all the time is a great idea, but I think it is/was brave to invite people to test the assumptions.
 
I still don't think cdl all the time is a great idea, but I think it is/was brave to invite people to test the assumptions.

Agreed. If it was a good idea all the time it wouldn't have a switch. I'm curious as well. I started rereading through this thread and relived the pain for a brief moment.
 
Back
Top Bottom