Man-A-FRE OME Susp kit

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 15, 2005
Threads
29
Messages
121
Location
Leesburg, VA
I did search for the poll on suspensions, but cant seem to run across it.....

Going to get one of these......

OME-40DDAKKAR DELUXE KIT 40 SERIES E-7/80 W/DAKAR 2.5" $1,215.00 with anti-Inversion greaseable shackles.

Or the CCOT Lift Kit - FJ40 HFS- 1961-7/80 - Lift Kit 2.5" Lift for 40 Series and buy the shackles separate.......

Or the SOR kit.....uggg......too many choices...

Anyone recommend the better of the three.....will I need breaklines for the above kits?

I dont go off road much since I simply travel too much....but moving to Denver this Aug.....but still not much offroading...

Another question.....from OME they need the month and year......my FJ is a 1978 from South America.....but I have no idea of the Month...I cant look at the vehicle because it is in storage and I am in Baghdad. Anyone see any issues pertaining to the month in ordering this kit?



BD
 
Last edited:
I would go with the OME or CCOT kits first, had the SOR kit, bent the springs and it rode like a tank.
CCOT HFS springs made my ride real nice and was worth the money, nobody says much bad stuff about OME for that matter
;p
 
Did you call Kurt at Cruiseroutfitters? He is exceptionally good to deal with, and handles the OME Dakar kit which would be my reccomendation. I personally think a new and longer flexible brake line to the front and rear axle is a good thing. The old ones tend to be cracked after all these years. If you have time and a good NAPA, you can take in the old line, they get out "the book" and match up the ends with one of a longer length. That costs you all of $11. I've had an OME full kit on my 60 for 3-4 years and can say nothing but good things.
 
Springs

I have the OME 2.5" lift running 33x10.50. I'm also using their shocks and steering stabilizer. I originally ran OME anti-inversion shackles and pins. I've been very happy with the improvement over the stock setup. The one change I have made is that I changed out the OME shackles and pins for 4+Plus units from MAF. They are definitely more robust.
 
JIKSER.....Wow....what a nice looking kit.....AWESOME price... I am going to give them a shout.... What a Coincidence....only minutes from my area.....Nasvhille...
 
Last edited:
I just did the OME Kit; that is, DAKAR springs, OME poly bushings, shackles/pins, and OME gas shocks. This is my third set of springs since 1982.

my second set of springs were 15 years old and very tired and may have been... Rancho... not sure, it was a long time ago and i didn't know my head from my ass at the time. they were what were being sold by a TLC parts guy in upstate NY.

in any event, the OME kit completely kicks ass. the ride is great!

that's my 2¢.
 
Did it myself in my garage with minimal tools. Pretty simple. A lot of people have trouble with the bushings but when they are 30+ years old an wore plumb out they just fall out. It is the 4".

Les
 
Bill,

I actually did a combo of what you're looking at and what Jikser did. I bought the OME Dakar non-premium kit from MAF...and then I bought the anti-inversion shackles and greaseable pins from TPI4X4. You'll need to buy u-bolts too.

Since I went with the 2.5" kit, I didn't replace any brake lines. I did all the work in my garage....and even though I bought a brand new compressor for the job...I ended up just using hand tools.

By far the most difficult part of the whole install for me was removing the front frame pins.....Remove the frame pins before removing the shackle side....don't ask how I came to know this...that and use a wrench to rotate the pins while you bang on the innerside with a BFH....

The Smoky Mtn kit is priced right though....
 
Back
Top Bottom