LX570 Slider group buy (1 Viewer)

[grinchy]

75850-60040-D0 <- note the last two digits vary by color. There is a different part # for the other side.

Cheapest I could find was used parts in Japan. Even with shipping (which was $175), they were less than $350 all in. But I highly recommend you do the running board delete instead. Here: LX570 Running Board Removal

 

[tbisaacs]

Currently staring at pics of @grinchy and @milemarker60 's trucks because I've got some running boards to trim. #itshappening

 

[grinchy]

something like this is your friend:
Worx 2.5 Amp Oscillating Tool-WX665L - The Home Depot

You'll want the 270 degree round 'blade'

 

[supercarrera]

Currently staring at pics of @grinchy and @milemarker60 's trucks because I've got some running boards to trim. #itshappening

Mine will be on the way soon too. I noticed you didn't order the rivet nut tool. You have one already?

 

[tbisaacs]

Mine will be on the way soon too. I noticed you didn't order the rivet nut tool. You have one already?

Yep. I have a tool with mandrels that go up to M6 and then one of these that’s an M8:

https://www.amazon.com/dp/B01N53J95N/ref=cm_sw_r_cp_api_i_-1owBb511DD74

 

[RyanR]

Looking at everyone’s trucks here in Telluride at the LCDC is making me want to pull the trigger. I’ve been running harder and harder trails lately and wind up with the steps folded up on both side at the end of the day then jump on them to bend them back down. Eventually those brackets will break from all the bend and rebending.

 

[aphextwin]

Hi. I’m newish around these parts. I’ve been following and reading this great forum for last 10 yrs. I recently purchased an LX and I’d like to join any possible group buy for sliders.

 

[grinchy]

A new year.... Maybe we can get model Lx570 into a fab this Year? For my part I'm talking with @MT4x4 about a modeling visit, no dates yet but it should be in the next 6-8 weeks.

 

[Chrisleduc1]

A new year.... Maybe we can get model Lx570 into a fab this Year? For my part I'm talking with @MT4x4 about a modeling visit, no dates yet but it should be in the next 6-8 weeks.

Looks like my ‘18 LX and I are pretty close to @MT4x4, and would be willing to help out...

 

[grinchy]

@Chrisleduc1 great news! When they have a 200 slider in stock we can Figure out who can get up on the rack soonest.

 

[TeCKis300]

Doing it wrong and using stock steps as slides.

I'm not as hardcore as some LC owners that like to rockcrawl, but I have taken licks here. My penchant to keeping things light for the sake of performance is a much higher priority. That said, sliders are one of the very few pieces of armor I could actually justify. And Slee's product fits the bill nicely without too much bulk, and great aesthetics.

 

[razzyrazz]

Doing it wrong and using stock steps as slides.

View attachment 1912829

I'm not as hardcore as some LC owners that like to rockcrawl, but I have taken licks here. My penchant to keeping things light for the sake of performance is a much higher priority. That said, sliders are one of the very few pieces of armor I could actually justify. And Slee's product fits the bill nicely without too much bulk, and great aesthetics.

Ya I've had bumpers, winches, full skid plate sets, sliders, etc. over the years. The only thing I ever used was the sliders. I dont go "rock crawling", though I have done some stretches of rocks. My offroading is to get to a remote campsite or a nice view. If I do destroy a bumper then I can replace with a fancy offroad bumper. Need those LX Sliders Slee!!

 

[MT4x4]

We will keep you all posted as progress is made on LX570 sliders. Thank you all for your interest!

 

[RyanR]

We will keep you all posted as progress is made on LX570 sliders. Thank you all for your interest!

I was going to say would be great to have another option, but unless SLEE has cleared up their manufacturing woes for the LX570 sliders, it wold be great to have ANY option you can actually purchase!

 

[tbisaacs]

I have a hunch that the MT sliders would fit with minor modification to the rear mount. Who will be the first to buy a sacrificial set ?

 

[grinchy]

Oh I’ve considered it. Even have printed their sales photo on grid paper to identify which ahc stuff is using the holes. Driver rear accumulator will need to space out probably. Am hopeful a fit appt can be done soon.

 

[Chrisleduc1]

I have a hunch that the MT sliders would fit with minor modification to the rear mount. Who will be the first to buy a sacrificial set ?

I’m not too far away. I’d billing willing let @MT4x4 experiment on mine, depending upon time needed...

 

[gentimmy]

Just don’t be like CBI and drop product at SEMA never to be heard from again

 

[DenverLX]

Im also ready to buy a set. I prefer the tube style sliders with the rear kick out as opposed to the LX Slee Sliders. But, I suppose any sliders are better than none.

 

[RyanR]

Im also ready to buy a set. I prefer the tube style sliders with the rear kick out as opposed to the LX Slee Sliders. But, I suppose any sliders are better than none.

I actually like the SLEE sliders quite a bit and the integration of the lighting is great. I'd give them my money if they could give me a set of sliders but sadly at the moment that doesn't seem to be possible. SLEE and MetalTech are my two favorite vendors for my Toyota addiction so I'd happily give either my money. (Hint Hint MetalTech, LX GhostRider Bumper??)