locking gas cap

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

it will not fit, 65 is a different animal.

Don't know of one for a 65, SOR use to have OEM locking caps....not sure anymore. But AFAIK no OEM caps are made anymore

red66toy said:
It says it only fits FJ40s from 71-83. Do you think that it would fit on my 65 FJ40?
 
I was not able to find anything for my '65 FJ45. So I got a 72 filler neck and cut off the opening and put it in the '65 filler tube. You can find locking caps for the 72 and up. If you go too far up, you then have to deal with the flap in the tube as well..
 
I know it isn't what you are asking but I have sourced the entire fuel door assembly from a later model 40. I got it to create a second door for my aux gas tank.

Just a thought, got it for like 15 bucks, pocket, door and filler assembly. I see them every once and a while on ebay.

Rezarf <><
 
I might be mistaken, but I don't believe the early 40s can accomodate a door? My 68(I think) can't. The bottom of the filler neck sits flush with the body line. With gas cap, it protrudes about 3/8". To add a fuel door, he'd have to change necks, if his is the same as mine.

I think all 60s models came w/o fuel doors? I'm sure an expert (certainly not me), can verify years.
 
Yeah, no fuel door option on my cruiser. Thats lame about there not being a locking gas cap that will work. With gas prices going up, I am a little worried that some punk will just steal the gas out of the cruiser. I will let you guys know if I ever find one that works. Thanks.
 
Chase, I had to do the cut and weld on the filler neck, too. But at least I have a locking gas cap. Before I lifted it, the filler neck was just exactly at urinal level for a guy standing on the curb. So at the time I wasn't worried about something getting out as much as I was "additives" getting in.


Ed
 
I took my 66 gas cap to National Auto and found one that was a match with it and locks. It's kida large and retro looking tho. No pics 'till next week. I think I still have the box for part number. I'll bet you could do the same at many parts places if they'll let you dig around a bit.
 
Well you could just run a padlock through the cap somehow. This oughtta give ya an idea of how to get started. I'm thinkin just a couple drill holes and you're good. :D
FunnyPart-com-redneck_car_lock.webp
 
Back
Top Bottom