Lift Time

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Can't really go wrong with a set of Icon springs to fit your desired results as well, in addition to what everybody has recommended already. They will net 3-4" of actual lift on a light rig.
 
I recently upgraded suspension with the OME "J" springs/L shocks from the stock/sacked out LX450 shocks/springs. The ride is stiff unladen but toss on 400lbs. of RTT/Camping gear etc. & she smooths right out. Should be brilliant after bumpers/armour go on. My rig is going to primarily run as a tourer so rock crawling isn't a huge concern. I think a rear panhard bracket and a front adjustable panhard will be the extent of my future suspension mods for quite some time.

As others have mentioned there are lots of options out there compared to what once existed. For my purposes as a tourer I took the fact OME was the primary game in town for so long as a sign the system would be long term durable. I can't reflect on any other options however as I have zero experience with them.
 
Alright, so I went with the Dobinsons 2.5 leveling kit and I can't say how much I love it. Took my dad and I a full 8 hours just because we had to saw off some bolts that didn't wanna go. Not even with the impact.

IMG_2326.webp


IMG_2361.webp


IMG_2363.webp
 
What shocks?
 
I see this thread and I keep hearing “Hammer Time” in my head.
 
What shocks?
I believe GS59-683 in the front and GS59-682 in the back. Looks like those are their standard shocks for 0-3" lifts.
 
I have the j lift and the Slee parts for a 4” lift

It rides like a Cadillac for me, If I did it again I would want a bit less lift for the highway. Without any weight it is tall and soft, definitely not a good feeling
 
I just put a OME medium on mine after going down to Slee and talking to them about a J lift.

Truck sits totally level when loaded. Maybe 3/4" higher in the rear when empty. I have a set of Dobinsons drawers in the rear and a trail gear tube bumper up front with a 10k winch. I have yet to install the caster correction bushings.

No rub with 315/75/16 on factory alloys and I am loving the ride. My last vehicle was a FJ Cruiser with an icon / fox setup and I honestly think the 80 rides better. Maybe that's because I have a front swaybar now.....

I was actually even ready to go with a 4" Slee lift but Christo had some good advice for me... "You don't have the weight and your tire size is fine. Throw an OME medium on there and start wheeling it".
 
FWIW, I have no problem with someone that put a lift and bigger tire on a rig purely for looks. I would do the same even if I wasn't going to wheel it. Not any different than performance street cars that reduce ride height and increase wheel size/low profile tires because it just looks better. So to the OP, I think you made a good choice. For a non-wheeling truck (for now) it's a decent choice and if the time comes that a bit of wheeling happens, it will handle it better than stock. Now throw the 35's on it! Every 80 on the road should have at least a 2-3" lift and 35's IMO. It's how they should be.
 
FWIW, I have no problem with someone that put a lift and bigger tire on a rig purely for looks. I would do the same even if I wasn't going to wheel it. Not any different than performance street cars that reduce ride height and increase wheel size/low profile tires because it just looks better. So to the OP, I think you made a good choice. For a non-wheeling truck (for now) it's a decent choice and if the time comes that a bit of wheeling happens, it will handle it better than stock. Now throw the 35's on it! Every 80 on the road should have at least a 2-3" lift and 35's IMO. It's how they should be.
To each his own. I have 35s on mine too, but it isn't a daily driver but more for offroading and outbacking. The performance difference between a rig on 35s and one on 33s is very noticeable. For me, on a driver, 33s are cool enough. That is unless you want to do gears, turbo, etc.
 
To each his own. I have 35s on mine too, but it isn't a daily driver but more for offroading and outbacking. The performance difference between a rig on 35s and one on 33s is very noticeable. For me, on a driver, 33s are cool enough. That is unless you want to do gears, turbo, etc.
Yep. to each his own. I don't disagree with what you're saying about 33's being "enough" for a driver. For a daily driver following that logic, why change from the stock size tires? From my experience I didn't notice that much of a change going to 35's and in fact daily drove an 80 for 15 years on 35's with stock gears. That was in Utah with lots of canyon hills etc. I suppose everyone may have a different level of what's acceptable in terms of driveability but I never had an issue or complaint. I like my current truck with 4.88s but wouldn't have a problem driving a truck with stock gears and 35's again.
 
To each his own. I have 35s on mine too, but it isn't a daily driver but more for offroading and outbacking. The performance difference between a rig on 35s and one on 33s is very noticeable. For me, on a driver, 33s are cool enough. That is unless you want to do gears, turbo, etc.
I agree. Since my 80 is mainly driven by my mother daily, we're looking at alternatives so I can give the 80 some rest. So I'm hoping that in a few weeks she won't be driven daily. Which would allow me to put 35s with out worrying about gas/power (if any change at all). :)
 
Back
Top Bottom