Land cruiser down.. need motor

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 3, 2015
Threads
6
Messages
22
Location
jacksonville nc
Well...this last cold snap killed my 80 and it's all my fault...a few weeks ago I had a radiator hose bust while out in town..got it fixed and topped it off with water to limp it home (this is were I messed up) got home got busy and completly forgot about draining it and putting antifreeze in...long story short...there wasn't enough antifreeze in the block and it froze and cracked the block last weekend...so now me and the wife are down to 1 vehicle with no way to fund a new motor at the moment due to me having to have surgery and I've been out of work and saving for to get it done...just want I didn't need at the moment...but if anybody had any leads on a good running for a decent price that can ship to NC or in NC please let me know I may be able to sell a few things off in order to fund it.....stupid stupid stupid I can't believe I let this happen
 
You going to do the motor swap?

You really need another vehicle (beater) to allow you time to work on the LC and not make mistakes.
 
Sorry for the bum luck but you have company in the same boat in Jacksonville as well.

Post up in classifieds here in the NC forum

For Sale/Wanted

and start looking through the nat'l forum classifieds for sale and parting out sections

Classifieds

I might try calling Hardline fabrication services, trollhole cruisers, forge industries and iron pig to see if they have any take outs for repower projects.
 
You going to do the motor swap?

You really need another vehicle (beater) to allow you time to work on the LC and not make mistakes.
Yes I can do the swap my self...the 80 was my wife's daily I have a f150 as my daily...I'm going to slap my street meats back on my 81 pickup trail rig and drive it so the wife can drive the Ford in the meantime
 
Sorry for the bum luck but you have company in the same boat in Jacksonville as well.

Post up in classifieds here in the NC forum

For Sale/Wanted

and start looking through the nat'l forum classifieds for sale and parting out sections

Classifieds

I might try calling Hardline fabrication services, trollhole cruisers, forge industries and iron pig to see if they have any take outs for repower projects.
Thank you! And at least I'm not the only one... it's nobody's fault but mine so I can only be mad at myself I of all people know better/should have remebered it just completely slipped my mind once I got it back home
 
It happens. Almost happened to me as well. Forgot i blew a throttle body hose in New Mexico this spring..... remembered sunday about 11 pm and frantically went into scramble mode.

At least you guys are looking for difderent motors so no competition in the same zip code.

Drop a pm to krzyabncanuck as well. His shop is in raeford but hes out west playing part of the fire brigade and genearlly having a good time for a while. Its a stretch but he might have something of help.
 
Is the block cracked externally? If so, you may be able to temp fix is with JB weld or the like. Dry out the crack, pack the epoxy in, run it with a loose radiator cap to keep it from building up pressure. I've seen this done and work on an old air compressor engine, but do doubt it is hack.
 
Sucks to hear about the cracked block but a good lesson for all. I see boats for sale each spring on craigslist that suffered a similar fate....
 
total bummer dude. My buddy keyed me on to a running 1fz-fe on a stand in a guys garage for 400 here in colorado. Dono if it's still available
 
Well...this last cold snap killed my 80 and it's all my fault...a few weeks ago I had a radiator hose bust while out in town..got it fixed and topped it off with water to limp it home (this is were I messed up) got home got busy and completly forgot about draining it and putting antifreeze in...long story short...there wasn't enough antifreeze in the block and it froze and cracked the block last weekend...so now me and the wife are down to 1 vehicle with no way to fund a new motor at the moment due to me having to have surgery and I've been out of work and saving for to get it done...just want I didn't need at the moment...but if anybody had any leads on a good running for a decent price that can ship to NC or in NC please let me know I may be able to sell a few things off in order to fund it.....stupid stupid stupid I can't believe I let this happen
There's a local guy parting out a 91 in Atlanta I will ask if the motor avaliable .
 
Is the block cracked externally? If so, you may be able to temp fix is with JB weld or the like. Dry out the crack, pack the epoxy in, run it with a loose radiator cap to keep it from building up pressure. I've seen this done and work on an old air compressor engine, but do doubt it is hack.
or try a can of PET Milk, I've heard it works and couldn't hurt
 
Back
Top Bottom