just installed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 22, 2004
Threads
239
Messages
6,887
Location
sittin on the couch in UT
hey i just finished installing my aussie locker and test drove it. it is quiet when cruisin and making turns but when i crank the wheel and turn sharp it pops and makes loud noises, is this normal, i know some noise is normal but im just not used to noise like this i guess. thanks ;)
 
Are you applying power when you turn? If so, I think that's normal.

GL

And congrats.

Ed
 
normal but if it happens say every time you make a certain turn then it is most likely at the max for space between the inner halves and is skipping under light load. solution , use new or bigger thrust washers
It is normal to pop and ratchet but it should take a pretty good load to skip it.
 
how do i know when it skips as to ratchet?
 
anybody else who has aussie experience care to weigh in?
 
if you are turning with steady throttle, or in nuetral, it should make a loud clicking sound. the horrible popping that you hear shouldn't happen all the time.
 
the loud noise doesnt happen all the time only when i turn real sharp. the ratcheting i know is normal and thats working, just curious about this noise. i did test it on some hills and it works wonders. how did i go so long without one
 
Back
Top Bottom