JT's FJ40 build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

To be honest, I think all 3 of us were tickled s***less to hear it run!!...wish I had a video of JT's face!
 
jrob said:
To be honest, I think all 3 of us were tickled s***less to hear it run!!...wish I had a video of JT's face!
Click to expand...

I have to admit, I was pretty fired up...still am, really. After a rough week of work (which ended yesterday about 2 hours before this video was recorded), that was some pretty good therapy. Thanks for the help guys!
 
Not much progress. Lots of stuff ordered; some stuff in. Had some time today to start cleaning up the 60 hubs. Knuckle studs out, hub studs out, wheel bearing races out (new ones in the freezer). Going to wire brush the knuckles and hubs and put a little paint on 'em before putting the new studs and races in. Couple of pics (boring, I know):

IMG_20130707_173851.webp

IMG_20130707_173714.webp

Anyone need 60 series axles, steering arms, or calipers? I cleaned the arms, but they are only place holders for the upper knuckle shims.

IMG_20130707_173851.webp


IMG_20130707_173714.webp
 
Anymore progress JT?

Saw your 40 when I helped the guys with Lash's 40. solid base. It going to be a good one!
 
fountainhead said:
Anyone need 60 series axles, steering arms, or calipers? I cleaned the arms, but they are only place holders for the upper knuckle shims.
Click to expand...

I'm interested in the calipers if you are willing to ship them (should fit in USPS flat rate box). I want a set to rebuild and swap out the ones on my 60 at the moment. PM me a price and other details.

BTW - Nice build! :cheers:
 
What did I say Todd might say JT? Nice find!
 
Nice find. I rebuilt my 8274 a couple of years ago. Let me know when you want to tackle it.
 
You must log in or register to reply here.

Share this page

Back
Top Bottom