Oh hey, mine is inside the battery box too, the PO must have done it. If there’s anything to be gained from pictures I can take a few if someone needs them
JDM a/c drier relocation kit (7 Viewers)
- Thread starter Perroetaller
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Oh hey, mine is inside the battery box too, the PO must have done it. If there’s anything to be gained from pictures I can take a few if someone needs them
I have a 94 fjz80 and would like a relocation kit as well. Planning on a new bumper without the low hanger
Redclayrob
There are no pre-made kits available currently. The two reasonable choices are to find the lines off of a '91-early '93 that was R12 and splice the later R134 ends onto those lines or have an A/C shop re-locate the drier by either using flexible hose or bending new lines to fit.
Hi there, I have a limited number of Relocation Kits. I have followed this for a long time. Here is what comes with the Kit. New Drier W/Sight Glass, Switch, Lines, Fittings , Brackets and Clamps. working on Instructions. Initially there are 15 kits. Looking to ship in 14 days or less. I can produce these for $260 Shipped. No room on the price as I have already negotiated the best deal on my end. Hope you guys can use these. NOT OE TOYOTA PARTS -Andy
Just hit the 80’s here today. The first bout of heat always gets me. Now to get my 80 back on the road. I get motivated when I work on other people’s Cruisers. Thanks, it worked out well.
Yes!
I have a 1994 fj80 and it has the low hanger. It also has r134 sticker on the radiator support. Not sure why it wasnt in the battery boc already. I have the pump and gauges to do this myself. Can i just get a dryer and order lines that will fit since im already 134?
Only the '91-early '93's had the drier in the battery box. All the R134a 80's came with it down behind the bumper.
will this kit allow group 31 battery fitment with the rubber lines?
Looks like they are both 6 13/16 so between the Battery and the Core support is the same. Length should be ok as well with the Rubber Line as the Group 31 shows 13". Might have to move it a bit and see what works.
Is the kit still available? Where do the new hoses tie into existing tubing...any photos? Thanks and be well.
I sold my totaled 91 to a guy. He is going to salvage my 4x4 labs front bumper and put it on his 97 lx450. After reading this it sounds like he could use the AC parts from the wrecked 91 and relocate his AC drier on the 97 when he gets the 4x4 labs bumper installed. Is this correct?
Nobody better than Dave! @Japan4X4
Is it japan4x4.com? Any part #'s to search by?
All good questions. I get my part numbers from megazip.net. Enter your frame number and presto! If you want to see what it looks like plug the number into partsouq.com they usually will have a photo.
Decide what you need and email Dave Stedman stedman@japan4x4.com for a quote. Just keep in mind that gravity matters. I needed rear rotors for my 91 and it cost me. Plastic bits and bobs are super cheap to buy and to ship. Dave's customer service is second to none. Good luck and have fun making your list.
