Is there a 32mm nut anywhere on a 80?

[rc51kid]

I found a 32mm socket in my tool kit in the 80. I know i have a 32mm on my YZ250FX. But if i dont have one on the 80 i will move the socket into the shop. I think i put it in the tool kit one day when i had a long moto trip planed but cant remember.

 

[Kernal]

Nothing on a (Edit) stock FZJ80 requires a 32mm socket (see george_tlc post below)

 

[george_tlc]

ooh ooh me first

32mm hex head on the supercharger replacement crank pulley bolt.

Ok, time for an edit. What I wrote above is not a guess. I have spoken.

cheers,
george.

 

[Sacred80]

I found a 32mm socket in my tool kit in the 80. I know i have a 32mm on my YZ250FX. But if i dont have one on the 80 i will move the socket into the shop. I think i put it in the tool kit one day when i had a long moto trip planed but cant remember.

Harmonic balancer/crank bolt?

 

[Rifleman]

Harmonic balancer/crank bolt?

I believe that bolt uses a 30 MM socket and one heck of alot of torque to remove and install

 

[Kernal]

That goes way back:

Post in thread 'Help pleasee'

Jun 15, 2006

Pardon me CDan my truck is stock, so it just regular 30 mm size socket?

Thank you again

Correct, 30mm if you do not have a supercharger. Vehicles that have a supercharger have an additional pully that goes on top of the original pulley and it requires a longer bolt. The longer bolt has a 32mm head instead of the 30mm head on the original stock bolt. You do not need a deep socket for either bolt.

• cruiserdan

 

[mudgudgeon]

1hd-t/1hz series engines use a 32mm crank bolt too

 

[rc51kid]

Wow, lots of information. But sounds like nothing that i would be doing as a trail repair. I bet i threw it in the tool kit for a moto trip. I will move it to the garage where i do more moto work.