Ipor Rear Bumper

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 7, 2004
Threads
20
Messages
145
Location
Oregon
Looking for some feedback from those who have the IPOR rear bumper w/ tire carrier. I am going to get one of thier skid plates and am thinking might as well throw the bumper in with it.

Thanks
 
i don't have a bumper yet, but i wheel with people that do and they beat the hell out of them. The bumpers hold up awesome. the only damage from rocks is the paint. I currently have a Kaymar rear swingout bumper on my 80, and after using the IPOR bumper i really dislike the Kaymar. I prefer the latch on the IPOR and the spring pin catch to limit the swing out. I think it is a good product and well worth the money. The skid is a very stout piece as well, I haven't seen any of the skids ever become bent or deformed from even the hardest of wheeling.
 
Check jfz80's bumper install thread, he just put an IPOR rear bumper with swing out on a couple of weeks ago. I have seen the bumper in several times and it is definitely one of the, if not the stoutest bumper I've ever seen. Although I've never had any dealings with IPOR, I've never heard anything but good from the people I know that have.
 
got the skid and the rear bumper from IPOR on my 80....zero complaints....

I did go with my own custom swing setup tho....Lance did a double-swing for me, I then mounted the spare to the left with 4x4Labs stuff and a ladder/dual jerry can on the right, also with 4x4 Labs stuff.
 
Wifes rig has a IPOR bumper......from Tellico to Moab it has done GREAT.

Infact when Lance started IPOR he showed at GSMTR-04.....we talked about a bumper for the wifes rig, next thing I know we have bought it from Lance off his own rig:D

Great shop....He & Cam are stand up fellows.
 
I have their skid on now and a rear bumper with dual swingouts being finished and shipped soon. I have seen lance's rear bumper in fjz80's rig and it looks great. That's what made my decision. Plus he's kinda local.

Great people, great product.
 
Thanks for the input. I figured it would al be positive. Have never seen or heard anything bad about them.

I was just wanting to see if the bumpers, especially the side wing areas, were holding up well in the rocks.

I am going to call Cam tommorow and get the order going

Thanks again
 
second everyones comments here. great people and products and and one of few east coast options which wont matter so much for you. Ive got his skid and rear bumper and bought both my ARBs from him. Went and buried it first weekend after install in a recon trip in the mtns loved it. havent dropped it hard hard but tellico trip is january :) Do enjoy not messin w/ the spare and cant wait to see concretes dual swings. Here are a couple pics, i can take some others for you if you want.
bumperday 008 (Medium).webp
bumperday 016 (Medium).webp
bumperday 026 (Medium).webp
 
some of underneath
* NOTE * this is not an IPOR tow bumper i had the tow bar added to lances std. bumper.
bumperday 028 (Medium).webp
bumperday 029 (Medium).webp
bumperday 030 (Medium).webp
 
ok knew i had thes somewhere too, probably closest to what your looking for. On another note these bumpers (and ARB) are dimensioned perfect for a truck w/ its flares and we will see soon w/ concretejungles rig how they look w/out. Only thing to be figured is the relocation/illumination of you tag. let me know if you want a particular shot. The wings are not just a single 1/4'' plate they have another plate inside as a second reinfocing rib, not quite boxed b/c open ended but beefy. I did consisder a reinforcing brace to the frame but i dont know how much ill be resting on that foward pt on the bumper.
bumperday 031 (Medium).webp
bumperday 032 (Medium).webp
bumperday 033 (Medium).webp
 
IPOR Tire carrier and rear bumper

the joint that swings out the tire carrier RUSTS badly and looses it's ability to close properly......that is after owning one for only a couple of months. I have pictures if you'd like to see the three month rust process.

If they are reading this blog I'd be interested in what they have to say!!!
 
the joint that swings out the tire carrier RUSTS badly and looses it's ability to close properly......that is after owning one for only a couple of months. I have pictures if you'd like to see the three month rust process.

If they are reading this blog I'd be interested in what they have to say!!!

So I see you talked to them already huh?
I think not ,as I had a issue with one of the 1st rear bumpers they made for an 80 . Lance and Cam took care of it right away as they stand behind their work.

Reading everything you have posted so far here on Mud (all 5) your shooting right to the top to becoming the #1 Newbe douche by attacking a vendor who helps here on mud, on the trail ,and with the LandCruiser community.

Heres to you
:cheers:
 
troll...
 
A shot of WD or even better a pentrating lubricant has proved to work well for me; but as mentioned they are great guys, you should call them directly if you want to discuss your options.
 
The only thing that kept me from getting the IPOR bumper was that I didn't like the way the spare kind of hangs out there in mid-air. I wanted a more tucked, close to the body look.
 
Do you think the wings of rear bumper support full weight of pig on one side?
 
Last edited:
Among a few other issues these should be pointed out to potential buyers:

1) There is no place to put your rear plate on this bumper once it's mounted. No holes or hardware you pretty much have to figure it out yourself. I guess they think we are just going to glue it on or something.

2) They have made changes to the design not shown on the web site or mentioned to customers when placing an order. No longer have swing out stop pins as shown. They went to a bushing design and use friction to stop the swing outs.

3) They provided hardware that was not long enough so i had to go get different hardware to mount the swing out latches.

4) The four holes in the middle of my bumper do not line up with the four holes in the cross member so i'm pretty much screwed when it comes to mounting anything to the bumper at this point.

I covered the entire swing out posts with greese to prevent rust.
 
Back
Top Bottom