Introduction: New Here

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 19, 2022
Threads
1
Messages
8
Location
Missouri, USA
Hello everyone. I'm Dan from Missouri, USA (friends call me Danno). I just purchased my first FJ40. It's a 1972, although there are some things not period correct on it. It's had a front disk conversion done by a previous owner. I believe the original color is red. Somebody gave it a crappy rattle can paint job complete with paint runs lol. Currently, the only way to stop it is to run it into something so that is job #1...brakes! As far as I can tell, the only electronics working are the wipers. No headlights, turn signals, or tail lights. I'm excited to get cracking on it and get it road worthy. I'll go ahead and thank you all for the many questions I'm likely to have along this journey. Cheers!
72Green1.webp
72Green2.webp
72Green3.webp
 
Looks like besides the disc upgrade there has also been a shackle reversal done on the front end. What is your envisioned configuration/usage for it?

Welcome!
 
Welcome and Salute! :flipoff2:

Depending on the month, iirc the 72 has sort of a one off wiring loom. My first was a 72.
 
Last edited:
Looks like besides the disc upgrade there has also been a shackle reversal done on the front end. What is your envisioned configuration/usage for it?

Welcome!
I'm pretty new to this but am learning fast. I hadn't noticed the shackle reversal. What is the reason for the reversal? Is it necessary for the lift or aid in off roading capabilities?

I'm not planning on doing any serious off roading. More of a weekend toy and occasional drives to work. I think it has a little too much lift for my liking. Maybe an inch or 2 too high. I would like to use original parts as much as I can but am no means a purist. I will probably follow the resto-mod type build.
 
Welcome and Salute! :flipoff2:

Depending on the month, iirc the 72 has sort of a one off wiring loom. My first was a 72.
Thanks for the welcome! What is iirc? I planned on first chasing the obvious wiring problems. If it gets too far in, I have already decided to pull the whole harness and lay it out to repair/rebuild. I won't really know until I get into it I suppose. Wiring is definitely not my strong suit, but from what I've read so far, help from others and youtube make it a manageable job for someone with at least some mechanical ability. Did you rebuild the harness or rewire yours?
 
I'm pretty new to this but am learning fast. I hadn't noticed the shackle reversal. What is the reason for the reversal? Is it necessary for the lift or aid in off roading capabilities?

I'm not planning on doing any serious off roading. More of a weekend toy and occasional drives to work. I think it has a little too much lift for my liking. Maybe an inch or 2 too high. I would like to use original parts as much as I can but am no means a purist. I will probably follow the resto-mod type build.

Shackle reversal was/is done to improve the suspension. There are pros/cons for and against. Here is some info I found that may help with future decisions you make.
 
Thanks for the welcome! What is iirc? I planned on first chasing the obvious wiring problems. If it gets too far in, I have already decided to pull the whole harness and lay it out to repair/rebuild. I won't really know until I get into it I suppose. Wiring is definitely not my strong suit, but from what I've read so far, help from others and youtube make it a manageable job for someone with at least some mechanical ability. Did you rebuild the harness or rewire yours?
If I ReCall.
Wiring is the sorta the same as plumbing - switches turn the spigot on and off. You got this.
 
Back
Top Bottom