Instrument Panel Acting Up...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 14, 2004
Threads
8
Messages
36
Location
Houston, TX
I changed my choke cable out this last weekend and in order to get to it, we had to take the instrument panel off (or at least we thought). I unscrewed the two screws above the speedometer and tried to pull the whole thing out from the top and it wouldn't budge. At that point, we put it back together and got at the choke from underneath the dash. The problem is, now my gas guage, oil pressure, and temp guage all don't work. Strangely enough, the amp meter still works. Everything worked prior to this weekend. having never taken the instrument cluster apart, any tips before I dig into it? Thanks.
 
If it's an FJ40, first make sure you disconnect the fusible link at the battery (it's easy to short out the terminals on the back of the panel - DAMHIKT). Take out the two screws and then reach up behind the dash near the headlight switch and disconnect the speedometer cable from the back of the instrument panel. The panel should come out quite easily. When reinstalling it helps to insert the speedometer cable before replacing the panel and then sticking your hand back up behind the dash to push it home.
 
Make sure that you didn't accidently unplug the big round plug. I think that the amp guage will work with that plug being loose. Just a guess.

Later,
 
Bodean said:
Make sure that you didn't accidently unplug the big round plug. I think that the amp guage will work with that plug being loose. Just a guess.

Later,


Exactly
 
Back
Top Bottom