Steelies and skinnies rather than big wheels...
In Low Gear Custom Apparel and Merchandise
- Thread starter Mike Shull
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #22
I totally agree and I am working on something now with Bob’s FJ43. I scrapped this line art idea as that I made in Gimp but I think that I am going to scrap it because the tires are not turning out as I had hoped. I might go with a simple framed B&W and color outline for a t-shirt. Open to thoughts.
- Thread starter
- #24
Here are some more mock ups for everyone to ponder. Help Bob decide which ones look the best.
- Thread starter
- #25
Good morning. I am working on a new t-shirt/company logo design. I hear the request and I will look at doing more artwork with the factory skinny tire look soon.
I need to figure out what kind of boarder to use and I am open to thoughts. This will be printed on all items in place of the existing gear logo, which you can see on my website at Home | In Low Gear - https://inlowgear.com/
I started to add a flywheel as the boarder, but I don't like it and I'm not sure what is not working with the design...
Replacement for this logo in the inside of the collar:
I need to figure out what kind of boarder to use and I am open to thoughts. This will be printed on all items in place of the existing gear logo, which you can see on my website at Home | In Low Gear - https://inlowgear.com/
I started to add a flywheel as the boarder, but I don't like it and I'm not sure what is not working with the design...
Replacement for this logo in the inside of the collar:
- Thread starter
- #26
...I think the teeth are too sharp?
- Joined
- Dec 2, 2018
- Threads
- 12
- Messages
- 71
- Location
- Northern Nevada
- Website
- www.battlebornclothing.com
Love the art/photos. Nice work
- Thread starter
- #28
Thank you. I’ve been wanting to do this for a very long time and I have been working on some of these designs for months. The big challenge right now is balancing design with the task of building a business, and I am also knee deep in redesigning my shipping models so that I can sustain the business while seeing what I can do to offer competitive pricing.
- Joined
- Dec 2, 2018
- Threads
- 12
- Messages
- 71
- Location
- Northern Nevada
- Website
- www.battlebornclothing.com
Feel free to reach out if you need any help, been doing this since 2019 it's definitely a lot to handle. dm or email me if you need any help even if its just something simple. sales@battlebornclothing.com or you can shoot me a text any time 775-230-zero two one one
davidp14
SILVER Star
I like the second one but I'll buy one of whatever one you end up printing.
- Thread starter
- #31
Check out the front page of the website as I have three versions listed. I don’t have the full color cartoon listed so let me know if that is the one that you want.
- Thread starter
- #32
Here is the updated logo. Let me know your thoughts.
- Thread starter
- #33
Thank you very much. I will be storing your number in my phone. I really appreciate it. What an amazing community.
davidp14
SILVER Star
Just got one. Thanks for making these Mike!
- Thread starter
- #36
You bet, David! Thanks for the support!! Let me know how it turns out
- Thread starter
- #37
All calendars are on sale with FREE SHIPPING in the US through the end of January! They are listed on the front page of Home | In Low Gear - https://inlowgear.com/
Last edited:
- Thread starter
- #38
My cost on t-shirts ended up being lower than I expected so I reduced my pricing. If you purchased a shirt at the higher price, I have issued you a $4 coupon to your Etsy account. You should see this in your Etsy inbox. Please DM me if you have questions about your account.
I am working on my FJ40 line drawing design a bit this weekend to scale onto a shirt, as well as Bob's FJ43, then I will plan to work on some skinny tire drawings for ya'll.
Cheers!
Mike
I am drawing/tracing most of this by hand. I'll probably use AI more to assist with future line drawings, but my Cruiser doesn't have the typical lines anymore and I wanted it to be exactly to scale
The high contrast sea green background is just so that my eyes can see what I am doing 
. Replace that with the shirt color.
I am working on my FJ40 line drawing design a bit this weekend to scale onto a shirt, as well as Bob's FJ43, then I will plan to work on some skinny tire drawings for ya'll.
Cheers!
Mike
I am drawing/tracing most of this by hand. I'll probably use AI more to assist with future line drawings, but my Cruiser doesn't have the typical lines anymore and I wanted it to be exactly to scale
The high contrast sea green background is just so that my eyes can see what I am doing . Replace that with the shirt color.
Last edited:
- Thread starter
- #39
Three new shirt designs have been added to the store!
The first two are from Bob's (@devo) collection, and the first "modern" artwork of Bob's FZJ80 camping off the grid. The second one is of his FJ43 at the Bonneville Salt Flats. Thanks, Bob, for sending me your cool pictures!
The next shirt features Bill's (@Bill6840) 1968 FJ40. The front has a small shield with his cruiser at the bottom, and a larger view of the same shot on the back. Thanks, Bill! These photos turned out really nice!
The first two are from Bob's (@devo) collection, and the first "modern" artwork of Bob's FZJ80 camping off the grid. The second one is of his FJ43 at the Bonneville Salt Flats. Thanks, Bob, for sending me your cool pictures!
The next shirt features Bill's (@Bill6840) 1968 FJ40. The front has a small shield with his cruiser at the bottom, and a larger view of the same shot on the back. Thanks, Bill! These photos turned out really nice!
Last edited:
- Thread starter
- #40
...and some more drinkware! The first glassware has been added to the collection, and two more 12oz camping mugs. The first one has both of Bob's trucks featured, one on either side. The second mug has Bill's Cruiser on one side, and the badge on the other.
