ID this FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 13, 2005
Threads
5
Messages
104
Location
CT
I am looking at a FJ40 on ebay. It is listed as a '77 but has these doors on it.
77FJ.jpg

The doors look older than a '77.
Don't want to post the link due to the respect to forum members bidding on it.
 
Those doors look like a '74ish, but the fender mounted turn signal housing is '75 and later. Wiper motor mounted low on the windshield frame is later as well. Whats the VIN?
 
The doors are pre '75, but I've seen several with that change. Both because of rollcage and to get the vent windows are good reasons. They look better too, IMO.
 
The doors I have are just like that, and are a '70. Not to say that other years aren't nearly identical.
 
The door stops, are a dead give away to the year... just below those home made straps, you can see the later style...
 
Last edited:
The windshield on this cruisers is a 9/77 (78 model) or later. The rearview mirror and windshield washers nossle mounted on top started with the 78 model. It looks like they mounted parts from different years on this thing, just like alot of other cruisers. The fact that the doors and windshield have been changed would make me checked the tub and frame if I was looking to buy. I could see changing the doors to get the vent windows or clear the roll bar but the rearview mirror and nossle on top just doesn't seem that big of upgrade to chance the windshield. Of course I would buy a 40 that had been rolled and repaired than have to deal with rust. I put my 68 on it's side over thirty years ago. Bent the passinger's door and the hard top panel on that side. I replaced the doors (79) and top (73).

John
 
yes, you guys got the wing windows(we didn't except in a handfull of 83 fj40's), but these doors are the older/thinner doors.

My Aussie '82 FJ LX has vents like that, and from what I can tell are original.
 
Back
Top Bottom