hydraulic hoses???

[88chevota]

Does anyone know a good local place in the springs to get hydraulic hose and fittings? I am going to be building my own hydro assist set up.

 

[RLMS]

whistler bearing!! off of filmore st

 

[88chevota]

thanks!

 

[PPFJ60]

What size of ram are you looking at?

I have a 2" x 8" which is nice but I had to go with a high performance pump to run it.

I may have a line on a used high performance Toyota pump if you are interested.

 

[88chevota]

What size of ram are you looking at?

I have a 2" x 8" which is nice but I had to go with a high performance pump to run it.

I may have a line on a used high performance Toyota pump if you are interested.

I think I have a Saginaw pump already on my cruiser. It is the one that came on the 90 chevy 350. Will that run it? How much do you want for that ram. I was gonna go with a 1.5x8 ram.

 

[PPFJ60]

The pump isn't mine. Its currently on Mike's 75 Bronco but he is putting a 95 Mustang 5.0 H.O. in it and I don't think the Toyota pump will match up to the serpentine belt system. I will ask him if he wants to sell it. He may want to wait to sell it until he knows for sure that he can't use it. That may not happen for 2-3 weeks.

I tried to modify my Saginaw pump to run my 2" x 8" ram but it was a little sluggish. It may work on the 1.5" x 8". I guess I would try it first and change it only if you have to.

 

[88chevota]

I thought you were selling a ram. I stick with the saginaw pump. I may go ahead and get a high performance one if mine feels sluggish. I found a deal on a ram for $50. it is a 2x8 but seems to be pretty good. here is a link

Hydraulic Tie-Rod Cylinder - 2" Bore X 8" Stroke - 3000 PSI

have you heard of these guys?

 

[CO_Hunter]

The pump isn't mine. Its currently on Mike's 75 Bronco but he is putting a 95 Mustang 5.0 H.O. in it

I mentioned this to Mike before, I think. I have a complete EFI upper and lower intake for sale. No MAF meter or computer though.