Husky hubs

[JohnMerk]

As I go through my dads parts he has collected I've found a set of husky hubs,

I did some digging on them and there isn't a ton of information on them, they are pretty well beat and wore but oddly enough still in the box with the paperwork I don't plan to restore them currently so I haven't checked to see what parts are with them or missing but they appear pretty well complete. I like these oddball parts and will probably hold onto them because they are just kinda neat but if anyone has more specifics on them, or what truck I need to buy to install them onto

 

[Pighead]

Some info on early hubs down in the 25 section...

Thread 'early hub depository'

Nov 30, 2014

everyone knows about aisan hubs and there's a lot of info on the warns, so this thread is for everything else. this will be a bit of a pandoras box as hubs were manufactured by one company and sold under another company, or one company started it and another bought them out. a lot of the old companies have no info on the web.

i'll start out with the rare (becuase they were crap?) although commonly used on early 60s cruisers, husky hubs. litp will probably chime in here. iirc, that's who got annie's huskys. they were made by the husky corporation out of longmont colorado. early...

• nuclearlemon
• Replies: 62
• Forum: FJ25 Owners Group

• 

 

[GA Architect]

@dmaddox posted this Huskey HUB Handle thread back in 2008 < click here >

 

[JohnMerk]

Some info on early hubs down in the 25 section...

Thread 'early hub depository'

Nov 30, 2014

everyone knows about aisan hubs and there's a lot of info on the warns, so this thread is for everything else. this will be a bit of a pandoras box as hubs were manufactured by one company and sold under another company, or one company started it and another bought them out. a lot of the old companies have no info on the web.

i'll start out with the rare (becuase they were crap?) although commonly used on early 60s cruisers, husky hubs. litp will probably chime in here. iirc, that's who got annie's huskys. they were made by the husky corporation out of longmont colorado. early...

• nuclearlemon
• Replies: 62
• Forum: FJ25 Owners Group

• 

Wow so they really are early then, I will have to offer them to my grandpa for his 25 maybe he could use them!

 

[Living in the Past]

@dmaddox posted this Huskey HUB Handle thread back in 2008 < click here >

See in the thread I offered to trade some Warns for them. Unfortunately when I got them the one handle that was there was gone.

Wow so they really are early then, I will have to offer them to my grandpa for his 25 maybe he could use them!

Might check to see if it still has the handles. I do not see them in the picture. Those are the weak part of the hubs and very hard to find.

 

[middlecalf]

Lot’s of hub knowledge in Longmont CO in those days.

Maybe there needs to be hub museum .

 

[JohnMerk]

See in the thread I offered to trade some Warns for them. Unfortunately when I got them the one handle that was there was gone.



Might check to see if it still has the handles. I do not see them in the picture. Those are the weak part of the hubs and very hard to find.

They are both there, they are just under the hubs, one is good one is chipped not where they seem to break tho so not sure how it chipped