Huskey HUB Handle - Needed.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

dmaddox

dmaddox

SILVER Star
10 Year 15 Year 20 Year
Joined
Nov 7, 2003
Threads
285
Messages
3,245
Location
Long Island, NY
Anyone have the thumb turner? handle? whatever it's called? The one on the other side (driver side) is broken off, leaving just a rusty screw there. It is such an odd shape, there's no way I can think of to rig this and still be original.

Many thanks crew.

Dallas Maddox
huskyhub.webp
 
I think there's one of those sitting in my driveway from an axle I got from bogus one. No use to me. You can have it for shipping. Just call me at the shop to remind me to look for it.

Mark
 
any course spline hub will work. I think the early ones, pre 64, mounted with 10mm vs later ones were 12mm. Steve gave me a few parts off his old 45. there might be course hubs in there. i'd have to look.

Personally I like the warn barrell hubs for the early ones.
 
wesintl said:
any course spline hub will work. I think the early ones, pre 64, mounted with 10mm vs later ones were 12mm. Steve gave me a few parts off his old 45. there might be course hubs in there. i'd have to look.

Personally I like the warn barrell hubs for the early ones.
Click to expand...

Do they still make them or have a part number on them? Or is this one of those cases I'm just going to have to find a set?
If that's the case, I'd love a picture if you know of one.

Thanks again!

Dallas
 
think my 45LV had Husky's on it when I got it, but dont recall that knob, will have to look

replaced with Warns off something I had laying around
 
You must log in or register to reply here.

Share this page

Back
Top Bottom