hub socket

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 28, 2005
Threads
9
Messages
28
I have been trying to track down a 50mm hub socket and I can't get one. Does any one know where they sell them?My 40 is sitting in the garage with the wheels off and waiting.....
 
I saw the ones on sor but it doesn't look like you can use a torque wrench on it.
 
Just buy a 2 1/4" 12point socket from sears or someplace ... works just fine, when I got mine they only had 1/2" drive so I had to buy an adapter too... total price was ~$25..

good luck!!

dan
 
Last edited:
call kurt at cruiseroutfitters,
thats where i got mine
 
It's 54mm, some say 55mm, and your Napa store should have one for $13. - $18.00. Made by one of the companies that make tools that hang on merry-go-rounds in the stores. OTC makes one of the kind with a bar welded across a stamped steel socket that works fine and lasts forever. The bar usually has a 1/2" drive hole in it, but now and then a 3/8" drive one is found. They're the same thing SOR sells as O.E.M. but at lots less money.
 
Just buy a 2 1/4" 12point socket from sears or someplace ... works just fine, when I got mine they only had 1/2" drive so I had to buy an adapter too... total price was ~$25..

good luck!!

dan

x2

Got the metric equivalent, should fine it on the shelf at any Sears.

Rezarf <><
 
my 40 is a 75 with drum brakes that are converted over to disc the axle nut is a 50mm the disc brake axles use a 54mm socket , the regular socket 2" workes on the nut but is too shallow to tighten all the way. I have found the 54mm every where but only sor has one that is 50mm but it will not take a torqe wrench it looks like you just slide a rod throught the back of it like a T and snug it up.
 
Find an spindle nut socket for a Willys Jeep... ;)

Have used that on a number of Land Cruiser drum brake front axles for years, over the tin SOR tool....


:beer:
 
Just buy a 2 1/4" 12point socket from sears or someplace ... works just fine, when I got mine they only had 1/2" drive so I had to buy an adapter too... total price was ~$25..

good luck!!

dan

I do belive your right, my 2" or 2 1/4" 3/4 drive socket worked just fine.
 
Back
Top Bottom