How many broken plastic connectors?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

musthave

All maps, one app!
Supporting Vendor
SILVER Star
Joined
Sep 4, 2013
Threads
729
Messages
5,910
Location
Florida / Colorado
Restoring my own cruiser finally. 263K miles and was leaking oil and just needed some TLC.

The wiring harness is mostly in great condition but every connector is brittle and snaps. I’m wondering if maybe I just replace the whole harness vs replacing each plug. At some point it’s easier.

713EE1CF-DFEA-4537-8A9D-45D2F60F711E.webp
 
I just had all my engine harness disconnected. The only ones that broke were the injector connectors. I replaced all six, they were on $5/piece.
I don’t think the 93/94 harness is available anymore. The later ones are $700, I think I would replace connectors myself!
 
Yea, probably more cost effective. Just frustrating that all injector plugs, distributor plug, 2 plugs on throttle body all snapped. I’ve replaced one or two in the past. Need to get the right tool this time before tackling it.
 
I have found that taking a pair of pliers and crunching the brittle plastic of the old connector away to expose the pins and small rubber seals on the back side the easiest way. I have 2 different sets of de-pinning tools and still haven't figured out how to get them to release the pins properly.
 
That’s the way I did it on a previous cruiser. I need to learn the right way after purchasing the right tool.
 
As an electrician with years of experience fiddling with all sorts of electrical connectors, even with the right tools, you're likely to mangle them anyway. :meh:
 
Not to be a dick but what’s worse is when you have replaced the brittle connectors with new ones, painstakingly took your time on the pin outs, and the new one snaps while you are plugging it back in. It brings all of what you are feeling right back in one fail swoop. Sorry, been there.
 
You need to open-up one of the old connectors, then you will see how they lock the pin in and have an understanding of how to unlock them. Then it's much easier to de-pin, IMOP anyways.

If you need pins or seals, and he has some of the connectors, I have used this site often, fast shipper and great prices.

Toyota-Polaris TPS sensor Connector
 
On a side note, I just ordered some crimp on terminals from Ballenger motorsports and noticed they have about every Toyota plug and pin you could want.
 
I did it. I’ll re-plug all of the harness and have a spare.

F1B4DD65-057B-4794-8FE2-0C4F1AA80A76.webp
 
Back
Top Bottom