Homemade Sliders

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

TEXASLAWMAN

SILVER Star
Joined
Oct 20, 2005
Threads
68
Messages
479
Location
TEXAS
Website
www.myspace.com
Well my friend and I made some sliders this weekend mostly my friend but I was there:grinpimp:. Mostly made from ideas on MUD and George's web site!

They only lack a few more "out" tubes in the kickouts, a custom skid under the 2 cats, and paint for the most part.
smile.gif


Frame connection photos...
DSC00327.jpg

DSC00328.jpg

DSC00329.jpg

DSC00330.jpg

DSC00331.jpg


Driver side tacked together ready for finish welding...
DSC00336.jpg


Inner trim for body seam..
DSC00340.jpg


The first look at the kickouts..
DSC00348.jpg

DSC00349.jpg

DSC00351.jpg

DSC00352.jpg


Finish welding....
DSC00356.jpg

Ready to go back on..
DSC00361.jpg
 
Way too close to the rockers.

They are gonna bang around when the body flexes in the mounts.
 
Way too close to the rockers.

They are gonna bang around when the body flexes in the mounts.

Yea they made a noise when I went and tested them today but nothing bad!:doh: Should be an easy fix though and for $77 Im very happy.:bounce::cheers::bounce2:
 
They need to be moved down or they will beat the hell out of the rockers just driving down the street.

You will need at least an inch of clearance in order to allow them to deflect in an impact without smashing into the rockers.
 
looks like you could have used them a while ago

Yep:rolleyes:The rockers are pretty trashed already!! But I got them more to help over stuff than to protect!!!:lol:
 
$77.00?? Damn...must a really good freind ;-). Nicely done.
airlaird

Well there was a case of beer too! But hell they feed me a steak dinner afterwards too!!:D
 
They need to be moved down or they will beat the hell out of the rockers just driving down the street.

You will need at least an inch of clearance in order to allow them to deflect in an impact without smashing into the rockers.

An inch sounds realllly excessive. Ive got about an eighth of an inch between my DOM and the notch i cut in the pinch weld on my rocker, and ive set the truck down hard on the sliders plenty. Not that it isnt a little too close, but i think 1/4 inch would be more than enough. No need to kill your ground clearance.
 
Looks good :beer:
as for the paint, theres a little bit of orange peel to it ;)

Paint was $47 still needs some sanding but somehow I think its going to stay as is LoL!
 
You will need at least an inch of clearance in order to allow them to deflect in an impact without smashing into the rockers.

Not if they are welded on!:grinpimp:
 
Dan is right as usual. I have almost identical sliders and they easily flex up 1/2 to 3/4 of an inch when the weight of the truck is on them. Maybe even an inch.

They look good, but if you don't move them down they will hit up into the rockers if you actually use them.
 
Ill proably never use them! But heck they cover up the rockers dont think they will tear them up much more!!!:doh:

CopyofPA170011.jpg


This is what she looked liked 2 weeks ago!!

CopyofIMG_2476copy.jpg
 
Last edited:
Don't over-look the noise factor. They will bang around and bug the hell outta you.
 
What he should do is go bash on them, and then they will clearance themselves. Problem solved.
 
Did they hand feed you the steak dinner? Were you fed grapes too?

:cheers:

No but his woman cut up the steak for me and gave me some damn good cheddar biscuits. And Doughnuts too!!! When we doing something I need some of your fancy smancy lexus driving personality to rub off on me and keep me out of trouble.
 
Don't over-look the noise factor. They will bang around and bug the hell outta you.

I took them out and tried to find something to rub on nothin to be found close... But i did twist her up a bit. There is a lil noise but I think it wont be to much trouble to lower them a bit!
 
I think they look great, albeit a little close to the rocker. I think you could stand to push them out a bit farther too. What if you welded a second plate onto the back of the one where it attaches to the outside of the frame and redrilled the holes?

That would allow you to move them down a little and out a little with the extra thickness of the new plates.

Just a thought.

Good work though.
 
Back
Top Bottom