Hitch Winch mount

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 13, 2008
Threads
28
Messages
234
Location
Lincoln, IL
has anyone had any experience with a winch mount on a 2" reciever hitch?

I found these CURT DELUXE WINCH MOUNT WITH HANDLES FOR 2" RECEIVERS - JCWhitney Auto Parts
and was wondering if it would even accomplish anything on a FZJ. I have seen them work fine in a Tundra.

The benefits I see on this is the 100+lbs will not always be on the daily driver, and I could put a receiver on the front and back making it possible to move the winch as needed.
 
This is my next project. I have an 8k warn winch with a hidden hitch class 3 hitch with an adapter plate which the hitch sits on. The Hidden hitch plate hasta be 8 years old, and has no grab handles but I like it. I'm looking to finding a spot on the front frame to mount a class 3 and cutting a hole in the front bumper the size of the hitch. Then get the tilt up license plate holder...
 
it seems to be a very practical set up so you can have good recovery positioning from either end
 
couple of scenarios to consider:

-you buried your nose in deep muck and wanna get winched backwards. You have to get out, open up the rear hatch, climb on in and heave ho out the old 100# winch and then mount it in the receiver.

-you installed the winch into the front receiver and go wheeling. Unfortunately, your approach angle is so terrible that all you can do is watch your buds tackle obstacles.

-You buried yourself up to the doors and need to get out and retrieve the winch out of the cargo area. You did build yourself a secure way to transport the winch so it doesn't become a projectile, right? :D So, you need to climb inside the cargo area, heave ho that SOB out, walk through the muck, go to the front of your rig, find the stupid receiver hole, clean out the muck that's inside it, shove the winch into the receiver :mad:, put the pin through the receiver but you dropped the stupid pin...:crybaby:......

Just playing devil's advocate :D
 
couple of scenarios to consider:

-you buried your nose in deep muck and wanna get winched backwards. You have to get out, open up the rear hatch, climb on in and heave ho out the old 100# winch and then mount it in the receiver.

-you installed the winch into the front receiver and go wheeling. Unfortunately, your approach angle is so terrible that all you can do is watch your buds tackle obstacles.

-You buried yourself up to the doors and need to get out and retrieve the winch out of the cargo area. You did build yourself a secure way to transport the winch so it doesn't become a projectile, right? :D So, you need to climb inside the cargo area, heave ho that SOB out, walk through the muck, go to the front of your rig, find the stupid receiver hole, clean out the muck that's inside it, shove the winch into the receiver :mad:, put the pin through the receiver but you dropped the stupid pin...:crybaby:......

Just playing devil's advocate :D






Or, you've been there!!! There are just some things you can't prep for.:steer:
 
couple of scenarios to consider:

-you buried your nose in deep muck and wanna get winched backwards. You have to get out, open up the rear hatch, climb on in and heave ho out the old 100# winch and then mount it in the receiver.

-you installed the winch into the front receiver and go wheeling. Unfortunately, your approach angle is so terrible that all you can do is watch your buds tackle obstacles.

-You buried yourself up to the doors and need to get out and retrieve the winch out of the cargo area. You did build yourself a secure way to transport the winch so it doesn't become a projectile, right? :D So, you need to climb inside the cargo area, heave ho that SOB out, walk through the muck, go to the front of your rig, find the stupid receiver hole, clean out the muck that's inside it, shove the winch into the receiver :mad:, put the pin through the receiver but you dropped the stupid pin...:crybaby:......

Just playing devil's advocate :D


Agreed to a point. These are more of a worst case scenario type situation. You could also look at it from the more positive side and say you have two options of getting unstuck; even though i may have to walk in the mud to install the winch, or i have a horrible impact and the winch becomes a projectile. I still will have two ways of getting out.

My old college roommy had this very setup on his K5 blazer. Pretty neat situation. I also saw it in action on a VERY tight trail where the truck following us needed help up an obstacle the blazer just climbed out of. Took 5 minutes to hook the winch up and pull the cable. Pulled him right up and didn't have to make a 40 point turnaround on a side-hill trail.
 
Not to mention the option of loaning the winch to another truck.

-Spike
 
right now the pros are definitely outweighing the cons for me. My next issue would be, how would I build a class III hitch on the front of the LC? Would I run into issues with suspension items?
 
i think there are definate pros and cons to mounting a winch or having it on a reciever, obviously different methods for different people or setups. So to support this members plans, if you are looking for a reciever setup to mount your winch on you can get one with a champion 10,000 lb winch. I bought this set and plan on building a new rear bumper with the winch incorporated in it.

So.... to pitch you a sale i have one brand new reciever with winch mount sitting in the spare bedroom if you are interested PM me, or you can find a champion winch with reciever mount at costco.

If you want to attach a class 3 receiver you could find a reciever setup that matches the width of your front frame rails or have one built by a shop incorporating the front crossmember and some beefed up square tubing between the frame rails.
 
pm me a price and I might consider it. The wifey is away on vacation so this is perfect timing.
 
IMHO the only negative to such a setup would be side pulling. I wouldn't trust the strength of the receiver to pull at any angle. Straight pulls i would be OK with.
 
IMHO the only negative to such a setup would be side pulling. I wouldn't trust the strength of the receiver to pull at any angle. Straight pulls i would be OK with.

As with almost anything, it depends on how you set it up. If you rely on the hitch tube to take the force, not so good. If you design it so the force transfers to the bumper from the carriage ends, it can be as strong as any mounted winch.
-Spike
 
how could it be rigged like that. Would a snatch block have to be used?
 
Or, you've been there!!! There are just some things you can't prep for.:steer:

LOL, nope, never been there per se but did watch the fun unfold with a buddy and his portable winch. It wasn't pretty.

Not to mention the option of loaning the winch to another truck.

-Spike

Only if the other vehicle has been wired with the quick connect plug in the front and the rear :eek:

I did give pretty severe examples but you get the idea. As stated, there are pros and cons to everything. If the winch can be mounted pretty high up front then it'd be a great benefit. Unfortunately, the chassis rails are kinda low so you're forced to mount it low.

It's definitely better than nothing.

Cheers.
 
Only if the other vehicle has been wired with the quick connect plug in the front and the rear :eek:

Wrong. I have a 25' set of cables with the quick connect on one end and eyelets on the other. Can be hooked to any battery, really easy on a marine batt.

-Spike
 
has anyone mounted a receiver on the front of their cruiser? I was thinking about how to build it as a class 3 status.
 
A friend of mine with an 80 had a front receiver mount custom fabbed. It turned out pretty nice.

His plan is to use it for his winch mount front or rear. The problem is that it sticks out really far when mounted, and when it isn't mounted, it a huge package and heavy as lead. (Winch plus cradle weighs 150 pounds or more. It takes the two of us to tote it around. There really isnt a good place to store it inside the 80. Not to mention, he really has only the front wiring sorted out and not the rear. Good idea but total PIA.

My take on this set up is that it's a boat anchor and not worth the trouble for a 4wheeler.

A winch mounted on a bumper is much more compact and useful. The winch on your buddies' truck is the one that will pull you backwards. If you just have to have a rear mount winch, build a custom rear bumper and integrate the winch into it. I've seen a couple of clean set ups using M8000s (because they are small drum) that do this OK.

I'm with Ali-it seems like a good idea in theory, but kind of sucks in execution.
 
has anyone mounted a receiver on the front of their cruiser? I was thinking about how to build it as a class 3 status.

I believe stayalert has mounted a class 3 upfront. I tried to get him to get pics so I could duplicate it.
 
Champion Power Equipment - C10586

This winch is slow, but other then that people seem like it, and it only weighs 84 pounds as a whole assembly. Not to brag, but I am sure I am sure I could move this around no problem. the kit also comes with wiring for both front and back.I have a plan for getting it to the bumper as close as possible, and it will be secured with ratcheting straps to the factory gear hooks in the 3rd seat area. I have seen it work so it seems to be good in more then theory.
 
You want to have a quick release pin for sure. I have a locking pin and wouldn't want to have to fumble with a key at night under 2-3 feet of water. Also, my 8k warn is a heavy 80 lbs.
 
Back
Top Bottom